If your window has come off its roller you will probably need a new regulator to get it back on the track. Alternatively you can try to fix it by detaching the paneling on your door and trying to get window back on roller.
To set the power window back on track in a Ford Focus, you have to remove the door panel. Once you get in there, you will see the track that you will need to put the window back on.
You will need to remove the inside door panel of your Chevrolet Blazer. Remove the window retaining clips. Put the window back into the window track. Tighten the window retaining clips.
By pushing the button downwards
I had to to take the door panel off remove the window motor raise the window then put the motor back on
you cannot put the window "back on track" the window regulator failed and will need to be replaced, good luck. What kind of lame answer is that? Yours might have been - not everybodies is.
how to put a power window back on track on a 1991 ford f150
Remove the inside door panel. The entire power window mechanism will be visible. Put the window back onto the window track.
Remove the inside door panel of your 1999 Chrysler Intrepid. Remove the window retaining clips. Put the window back into the window track. Secure the window with the window retaining clips.
To put the power window of a 2003 Buick Rendezvous back on track, first, remove the door panel to access the window mechanism. Ensure that the window is in the fully closed position, then carefully realign it within the track by pushing it back into place. Check the window regulator and ensure that any clips or guides are securely attached. Finally, test the window's operation before reassembling the door panel.
To put a window back on track in a 1996 Geo Metro, the door panel will have to be removed. Use a screwdriver to pry up the clips around the door panel. Then locate the window cable and rewind it. If the window is operated by a power switch, be careful not to pinch the fingers when rewinding the cable.
To put a window back on track in a 1996 Geo Metro, the door panel will have to be removed. Use a screwdriver to pry up the clips around the door panel. Then locate the window cable and rewind it. If the window is operated by a power switch, be careful not to pinch the fingers when rewinding the cable.
Remove the inside door panel. The entire window mechanism will be visible. Put the window back onto the window track.