To reset the maintenance required light on a 2005 Toyota Corolla, turn the ignition switch to the "OFF" position. Press and hold the trip meter reset button on the dashboard while turning the ignition switch to the "ON" position (without starting the engine). Continue to hold the button until the maintenance light blinks and then goes out. Release the button, and the light should be reset.
How do you reset maint read light on 2010 corolla
How do you reset maintenance reminder light on 2008 Toyota corolla? For what it is worth: To reset the Maintenance Required light on my 2007 Toyota Corolla: 1) Set your trip meter to the odometer setting (in other words, not Trip A or Trip B) 2) Hold down trip meter reset button and turn ignition to off. 3) While holding down the trip meter reset button now turn the ignition to on. 4) Keep holding down button until Maintenance Required light shuts off. Note: One some other Toyota models you hold down the Trip A meter rather than the odometer. Hope this works for you.
To turn off the maintenance required light on a 2011 Toyota Corolla, first, turn the ignition to the "On" position but do not start the engine. Next, press the gas pedal three times within five seconds. Finally, turn off the ignition, then start the engine to ensure the light has reset. If the light remains on, you may need to repeat the process.
maintenance with engine
The maintenance light,You will need to take it to a Dodge dealer to reset it. Or get a DBR-2 code scanner.BIG $$$
set your mileage on your actual mileage reading, not a setting measuring your trip. Keep hold down the button until it resets itself.
aperantly take the light out
The maintenance required light requires a scan tool to be reset.
How do you reset the maintenance required light in the 2011Toyota RAV4 with a smart key starting system
According to the owners manual for my 2004 Sienna, all it means is that an oil change is due. You can google how to reset the light, in case the guys in the shop forget to.
Turn the ignition key partially change display to "Trip A" and turn ignition OFF. Press the trip reset button and then turn the ignition key partially. Do not start engine. Hold reset button down until light goes off.
To reset the maintenance required warning light on a 1989 Dodge Dakota, unhook the battery connector cables for 10 minutes. Reconnect them and start the vehicle.