To set a 4-button digital frog watch, you will typically need to press and hold the "set" button until the display starts blinking. From there, you can cycle through the different settings (such as time, date, alarm, etc.) using the other buttons. Use the corresponding buttons to adjust each setting to the desired value, then press the "set" button again to confirm and save your changes. Refer to the specific watch manual for detailed instructions as the process may vary slightly depending on the brand and model.
Mode refers to the current set of functions. For example, on a digital watch, in time-setting mode, a specific button will change the hour; change the watch to stop-watch mode and that button might start the timing.
In order to set the time. 1.Keep light button pressed until you see SET coming on the digital screen. 2.Once you see that hit the reset button to set time now u can set time and date and year and alarm accordinigly
depends on the watch.
instructions for cardinal 3108 digital watch
matters on which one u have i have a water resistant on u press ans hold the lap button until it says set then us start and top button to change the number and the mode button to change to different things like the date hour min seconds
press right side down button for few minutes den u will be shown change of hours By using left side down button and right side upper button u can change d time
One way to set the time on a Timex is to press the mode button on the watch until it displays the time. Press set button and than the start/split button to change the time. Press the stop/reset button to decrease and press the set button again to set the time. Please refer to the related link for more information.
To set an Armitron WR165 digital watch to military time, first press the "Mode" button until you reach the time-setting mode. Then, hold down the "Adjust" button until the hour starts to blink. Use the "Start/Stop" button to toggle between 12-hour and 24-hour formats; select 24-hour for military time. Finally, adjust the hours and minutes as needed, then press "Adjust" again to save the settings.
In order to watch digital channels one needs to first purchase a digital set top receiver box. These are relatively cheap nowadays and won't set you back more than $50 for a standard unit.
To set the analog dial, just wait until the second hand is right on 12, and then pull the crown outward. The crown is the big knob at the 3-0'clock position. Rotate the crown until the time on the clock is right, and when you push in the crown, the watch will start running, so try to push the crown in at the top of the minute. To set the digital part, the lower right button means set, so hold that down until the seconds start flashing. Then you can press the upper right Start button to re-start the seconds at zero. To set the minutes, hours, days, and date (and 12-24-hour), press the mode button, which is at the lower left, and press the upper-right Start button to change the values When you are done setting the digital part, press the lower-right set button again.
press and hold the upper start button it will redirect you to set the time
Very simple Just press the SET button for 4 to 5 sec and it will blink the Sec continuously Now you are in setting mode and press the MODE button to select the time and date mode one by one and use the ADJUST button to set the correct time and date. Once you are finish the job press again the SET button to complete the same Cheers