how to rectify samsung hard disk. detect BIOS don't detect another system for slave hard disk. then, not installed os.
Master and Slave configuration is necessary for motherboard in order to choose right disk to boot from.
if u have winxp on the master hd, just boot ur computer from a 98boot disk and install win98 on the slave. the computer should automatically configure itself for dual boot.
Jumpers are used with the IDE (aka P-ATA) drives (hard disks or other drives like DVD recorder) . There can be two drives on the same cable with this norm, a master and a slave. The controller of the disk need to know if it is supposed to be the master or the slave. Jumpers are set to this purpose. There is a special mode called "cable select" where the position on the cable determines the mode (disk at the end of the cable is master, disk in the middle of the cable is slave)
The "master/slave" designation is necessary for the disk controller. It has little to do with the dual boot.
By default the computer boots the XP installation on the Master hard disk. If you need to access the slave system change slave to master.
first of all good day, my answer in that question is simple. The computer recognized the hard disk drive as a normal. he can be a slave nor a master. thank very much, that is only my opinion.
A computer hard disk or hard drive (fixed disk) is hardware.
Hard Disk Drive.
IDE hard disk, SCSI hard disk, SATA hard disk, External hard disk, it is also differ by RPM speed for the HADD. I hope that helpes.
There are two types of Hard disk. 1:Sea gate disk 2:SATA Hard disk
The history of hard disk is that, hard disk is invented in 1950's that time hard disk size is 20 inche's maximum the name of hard disk inventer is "REY JOHNSON" by the help of IBM team. ""BILAWAL ABBAS""