0
How does the receiver in a synchronous connection stay in sync with the incoming data stream?
In a synchronous connection, the receiver stays in sync with the incoming data stream through the use of a shared clock signal that is synchronized with the data transmission. This clock signal indicates when to sample the data bits, ensuring that the receiver accurately interprets the timing of each bit. Additionally, both the sender and receiver must maintain the same timing parameters, allowing for precise alignment and reducing errors in data interpretation. This synchronization ensures that data is read and processed at the correct intervals, maintaining the integrity of the communication.
What else can I help you with?
What is the difference between uart and usart?
UART is universal asynchronous receiver/transmitter. It is a piece of computer hardware that translates data between parallel and serial forms. Modern ICs that have UART's that can also communicate synchronously are called USARTs (universal synchronous/asynchronous receiver/transmitter).
What two message timing mechanisms are used in data communications?
In data communications, two common message timing mechanisms are synchronous and asynchronous transmission. Synchronous transmission relies on a shared clock signal between the sender and receiver, allowing data to be sent in a continuous stream with precise timing. In contrast, asynchronous transmission sends data in discrete packets, each prefixed with start and stop bits, enabling communication without a shared clock but requiring the sender and receiver to agree on the timing of data interpretation.
What transmission is data sent in a constant stream of frames?
synchronous transmission. In a asynchronous transmission, data is sent as individual data bytes
What is syncronous modem?
Synchronous and Asynchronous data transfer are two methods of sending data over a phone line. In synchronous data transmission, data is sent via a bit-stream, which sends a group of characters in a single stream In order to do this, modems gather groups of characters into a buffer, where they are prepared to be sent as such a stream. In order for the stream to be sent, synchronous modems must be in perfect synchronization with each other. They accomplish this by sending special characters, called synchronization, or syn, characters. When the clocks of each modem are in synchronization, the data stream is sent. In asynchronous transmission, data is coded into a series of pulses, including a start bit and a stop bit. A start bit is sent by the sending modem to inform the receiving modem that a character is to be sent. The character is then sent, followed by a stop bit designating that the transfer of that bit is complete.
Can you hook up dolby digital surround sound to high def receiver?
A Dolby Digital stream from a DVD player can be sent to a high def receiver by digital optical or coaxial cable.
What kind of delivery uses a clocking circuit to control the timing of communications between two WAN devices such as routers?
The kind of delivery that uses a clocking circuit to control the timing of communications between two WAN devices, such as routers, is known as synchronous transmission. In synchronous transmission, data is sent in a continuous stream, synchronized with a clock signal, ensuring that both sender and receiver are aligned in timing. This allows for efficient and accurate data transfer, minimizing the risk of errors that can occur with asynchronous methods, where data is sent without a shared clock signal.
A reliable byte stream and reliable message stream?
byte streambytes(data) send by user is received by the receiver in same order as sendwith out any errormessage streamit includes a manager with takes packet from user ( which contain address of destination) and send it to destination.if it is not accepted by receiver or it is not presentthan it send message to senderayushmightypain@gamil.com
Function of transmitter in wireless router?
To accept a stream of data packets and send it to a portable device (laptop, smart phone) receiver.
Can i connect my receiver with a bluetooth usb adapter?
Yes, you can connect your receiver with a Bluetooth USB adapter, provided that your receiver has a USB port and supports Bluetooth audio. Simply plug the adapter into the USB port, pair it with your Bluetooth device, and you should be able to stream audio wirelessly. However, ensure that the adapter is compatible with your receiver's system for optimal performance.
Why the vane of pelton turbine is made in double hemispherical shape?
oterwise the returning water stream can abstract the incoming water jet and hence reduces its efficiency
What type of data transper by TCP?
reliable, connection-based, full-duplex, byte-stream
Can you see 3gs camera on iPad via bluetooth?
No, it does not stream the camera through the bluetooth connection.
