0
Interrupt signals initiated by programs are called software interrupts. A software interrupt is also called a trap or anexception.
A signal informing a program that an event has occurred. When a program receives an interrupt signal, it takes a specified action (which can be to ignore the signal). Interrupt signals can cause a program to suspend itself temporarily to service the interrupt.
Interrupt signals can come from a variety of sources. For example, every keystroke generates an interrupt signal. Interrupts can also be generated by other devices, such as a printer , to indicate that some event has occurred.
PCs support 256 types of software interrupts and 15 hardware interrupts. Each type of software interrupt is associated with an interrupt handler -- a routine that takes control when the interrupt occurs. For example, when you press a key on your keyboard, this triggers a specific interrupt handler. The complete list of interrupts and associated interrupt handlers is stored in a table called the interrupt vector table , which resides in the first 1 K of addressable memory.
Allan Heller
Add your answer:
Earn +20 pts
What r the functions of interrupt initiated Input Output?
software
What are interrupts initiated by instructions called?
Those would be software interrupts. Interrupts initiated by the hardware would be hardware interrupts. While the socket a mouse is plugged into would use a hardware interrupt, a mouse driver would use a software interrupt.
Difference between harware interrupt and internal interrupt?
A hardware interrupt is initiated from a hardware event, such as a byte received from a serial port. It is asynchronous to the running program, i.e. it can occur at any time. An internal, or software, interrupt is initiated by the running program, thus it is under the control of the running program. In the 8085, for instance, the RST instructions are software interrupts. Note, however, that external interrupts can initiate a software RST instruction, so the two events can appear to be the same kind of event. The biggest difference is the handling of the interrupt enable (IE) flag. In the hardware interrupt, the IE flag is turned off when processing the interrupt, and it is turned on right before the interrupt service routine executes the final return instruction. The software interrupt, on the other hand, has nothing to do with IE. As a result, the code must be able to tell the difference.
What is an 8085 interrupt?
There are 2 types interrupts in 8085 such as: 1)hardware interrupt 2)software interrupt
Difference between programmed IO and interrupt IO?
1.Programmed IO is the process of IO instruction written in computer program , where Interrupt Initiated IO is done by using interrupt and some special command. 2.The advantage of Interrupt Initiated IO is ,it is a time consuming process than Programmed IO. 3.In Programmed IO technique to transfer data,required constant motoring on peripheral by CPU,once data transfer is initiated, CPU have to wait for next transfer. In Interrupt Initiated IO once data transfer initiated ,CPU execute next program without wasting time and the interface keep monitoring the device. When the interface determines that the device is ready to transfer data, it generate an interrupt request,CPU stop the current task,execute the transferring process,and then return to the previous on-processing task.
What are hardware and software interrupts in microprocessors?
(Q)What are Hardware and software interrupt? draw the block daigram of 8259 interrupt controller and explain in brief..
What is the difference between software and hardware interrupt?
The difference is that a hardware interrupt is a signal relayed to a system's CPU directly because of some piece of hardware, such as a keyboard or mouse. A software interrupt is a signal sent to indicate that something within a piece of software requires attention.
Name of instruction to reset the interrupt?
software interrupts
Which type of interrupt can not be masked by software?
The TRAP interrupt can not be masked by software, unless there is hardware in place to allow that, perhaps by anding an output bit with the TRAP request line.
Difference between software interrupt and hardware inerrupt?
Hardware Interrupt: Each CPU has External Interrupt lines(about 7). Other external devices line keyboard, Mouse, Other controllers can send signals to CPU asynchronously. Software Interrupt:is an interrupt generated with in a processor by executing an instruction . Software interrupt are often used to implemented system calls because they implemented a subroutine call with a CPU ring level change.
What is the advantage of using interrupt initiated data transfer?
It does not require the continuous checking of I/O port by the computer . The computer checks the port only when an I/O interrupt is encountered . It saves processing time.
What is software interrupt with examples?
Interrupt generated by executing an instruction is called software interrupt. It's also called 'trap'. Software interrupts are generally used to make system calls i.e. to request operating system to perform an I/O operation or to run a new program.Examples:C++:A cout or cin statement would generate a software interrupt because it would make a system call to print something.A fork() statement in Linux would generate a software interrupt because it would make a system call to create a new process.Assembly IA32:The instruction int 21h would generate a software interrupt which would request something from operating system (depending on the register values).
