To determine how long it takes to fill a 21,000-gallon tank at a rate of 130 gallons per minute, you can use the formula: time = total volume / flow rate. Dividing 21,000 gallons by 130 gallons per minute gives approximately 161.54 minutes. This is about 2 hours and 41 minutes.
12 hours. 14,000 divided by 20= 720 720 divided by 60 = 12
63
The time it takes to fill 12,000 gallons of water depends on the flow rate of the water source. For example, if the flow rate is 10 gallons per minute, it would take 1,200 minutes, or 20 hours, to fill the tank. Conversely, if the flow rate is 100 gallons per minute, it would only take 120 minutes, or 2 hours. Thus, the filling time varies significantly based on the flow rate.
My pool which is a small to medium sized pool took about 2 days.
2 Minutes 47 Seconds
1000 Minutes require to fill 10000 gallon pond
rape
The amount of water used to fill and refill a sink typically ranges from 1.5 to 2.5 gallons per minute, depending on the sink's flow rate. So, filling a sink can use anywhere from 1.5 to 5 gallons of water.
You have 16 x 32 x 8 = 4096 cu ft There are 7.48 gallons in a cubic foot 4096 x 7.48 =30,638 gallons 30638 gallons/8 gallons per minute = 3830 minutes = 63.8 hours, or 2.66 days
Obviously it partly depends on the shower head, but most will give about 2.5 gallons per minute, so you are using about 12 gallons of water, possibly about 8 - 9 of it hot.Place a 1 liter bottle below the shower and measure how many seconds it will require to fill it. Then:Number of gallons in five minutes = 78,1/ Number of secondsAn average shower head emits about 1.3 -1.5 gallons per minute, so that would be 7 -8 gallons.
It takes 7 gallons to fill a entire tire!
Depends on the volume and the size of the pipe. Fill a 5 gal bucket and time it. This will give you gallons per minute.