answersLogoWhite

0

It depends on the rate at which you are consuming the gas.

User Avatar

Wiki User

13y ago

What else can I help you with?

Related Questions

How to convert Cubic feet of acetylene to pounds?

To convert cubic feet of acetylene to pounds, you need to know the density of acetylene. The density of acetylene is approximately 0.0012 pounds per cubic foot. You can then multiply the cubic feet of acetylene by the density to get the weight in pounds.


How many square feet in a cubic foot?

There are an infinite number of square feet in a cubic foot. This is because a square foot defines a 2D plane, and 2D objects have no depth. They are infinitely thin and therefore there would be an infinite number of square feet in a cubic foot. Square feet have dimensions L2 while cubic feet have dimensions L3 so they are not interchangeable. If volume units could be converted to area units, then you'd be able to figure out how many acres of gas your car burned last month, and you could go to the store and buy the equivalent of 2 square feet of milk.


A cubic foot of water weighs 62.4 ib a basketball has a radius of 0.39 ft?

This question is incomplete as the last part has been omitted.


How much do footings cost per foot?

in texas is about 5 dollars per cubic foot plus labor last time i did it it was it was 600 dollar for a 30 feet long 12in width and 12in deep footing.


How many inches in 1.3 cu ft?

An inch is a measure of length. A cubic foot is a measure of volume or capacity.If the question refers to how many cubic inches in 1.7 cubic feet, then :12 inches = 1 foot12 x 12 = 144 square inches = 1 square foot12 x 12 x 12 = 1728 cubic inches = 1 cubic foot.1.7 cu feet = 1.7 x 1728 = 2937.6 cubic inches.


What is the difference between linear and cubic units?

A linear unit is used to measure length or distance whereas a cubic unit is used to measure volumes. A cubic unit may defined as a cubic measure (eg a litre) or it could be composed of three linear units (eg cubic centimetre), or a square unit and a linear one (acre-foot). This last combination is rare in the SI system because the linear units are more easily linked to square and cubic units.


How many cubic meters of air in in a 750 sqare foot room?

There are no square units in any cubic units. Square units describe an area, whereas cubic units describe a volume. If units of volume could be converted to units of area, then you'd be able to tell us how many acres of gas your car burned last month.


What is the mass in pounds of 1 cubic foot of osmium if density is 22.5 g per cm3?

A sample of ascorbic acid (vitamin C) is synthesized in the laboratory. It contains 1.50g of carbon and 2.00g of oxygen. Another sample of ascorbic acid is isolated from citrus fruits contains 6.35g of carbon. How many grams of oxygen does it contain? Which law are you assuming in answering this question?


What is the cubic yard total of a cylinder 1 foot in diameter and 4 feet in length?

The volume of a cylinder is a product of its length, the square of its radius, and the irrational number pi. The radius is half the diameter, so that the volume of this cylinder in cubic feet is (4)(0.5)2(pi) = about 3.14 cubic feet. There are 27 cubic feet per cubic yard, so that this equals 3.14/27 = about 0.12 cubic yard, where the last digit is depressed because it may not be significant -- there is only a single significant digit given for the dimensions of the cylinder.


How many perfect cubes are between 100 and 1000000?

The cubic root of 100 is about 4.642, so the first such perfect cube would be 5. The cubic root of a million is 100, so the last such perfect cube would be 100 (or 99, if you don't want to include the endpoints).


Last American man set foot on the moon?

Eugene Cernan and Harrison schmitt were the last men to set foot on the moon


Is a shoemakers model foot called a last?

Yes, it is called a Last.