To fill a 30-gallon drum with concrete, you would need approximately 12 bags of 80-pound concrete. This is based on the fact that one 80-pound bag of concrete yields about 0.6 cubic feet, and a 30-gallon drum holds about 4 cubic feet. Therefore, dividing 4 cubic feet by 0.6 cubic feet per bag gives you roughly 6.67 bags, but accounting for the weight and settling, it's safer to estimate around 12 bags.
To determine how many 80-pound bags of concrete are needed to fill a 55-gallon drum, first calculate the volume of the drum. A 55-gallon drum holds about 7.4 cubic feet (since 1 gallon is approximately 0.133 cubic feet). An 80-pound bag of concrete typically yields about 0.6 cubic feet. Therefore, you would need approximately 12 to 13 bags of concrete to fill the drum.
To calculate the volume of concrete needed to fill a 55-gallon drum, you first need to know the dimensions of the drum. Once you have the dimensions, you can use the formula for the volume of a cylinder (V = πr^2h) to calculate the volume of concrete required. Remember to convert the volume from gallons to cubic inches or feet for accurate results.
To determine how many 80 lb. bags of concrete mix are needed to fill an oil drum, first calculate the volume of the drum. A standard oil drum has a capacity of about 55 gallons, which is approximately 0.2 cubic meters or 7.4 cubic feet. Since an 80 lb. bag of concrete mix typically covers about 0.6 cubic feet, you would need roughly 12 to 13 bags to fill the drum completely.
To determine how many bags of concrete you need to fill a five-gallon bucket, first calculate the volume of the bucket. A five-gallon bucket holds about 0.67 cubic feet. If you're using a standard 60-pound bag of concrete, which typically yields about 0.45 cubic feet, you would need approximately 1.5 bags to fill the bucket. Always check the specific yield of the concrete mix you are using for the most accurate calculation.
Fill the 5-gallon drum. Pour the contents into the 3-gallon drum, filling it. Now you have 2 gallons left in the big one.Empty the 3-gallon drum. Pour the 2 gallons into it. At this point there is room for one more gallon.Now refill the 5-gallon drum and pour off as much as it takes to fill up the small one. That means you are removing one gallon.Now you have exactly 4 gallons in the 5-gallon drum.or Fill the 3 gallon drum. Pour the contents into the 5 gallon drum. Refill the the 3 gallon drum and pour the contents into the 5 gallon drum until it is full. Empty the 5 gallon drum. You have 1 gallon left in the 3 gallon drum. Pour the remaining 1 gallon into the 5 gallon drum. Re-fill the 3-gallon drum and pour that into the 5 gallon drum giving you 4 gallons. or Tip the 5 gallon drum and fill it until water is level to both the bottom and spilling out the top; next do the same with the 3 gallon drum; then pour the half full 3 gallon drum into the half full 5 gallon drum, rusulting in 2.5 plus 1.5 equals 4 gallons! orWatch Die Hard 3 for the answer.
That could be answered if we knew the volume of one 40-lb bag. Bags of leaves, styrofoam, beans, and gold all have vastly different volumes.
One gallon contains 128 ounces. To make a gallon using 3 ounce bags, you would need to useÊ42 and 2/3 bags.
an extension adapter must be installed to the drum fill adapter
About 7 bushels
The unit weight of sand/soil is 105 lbs/cu ft1-gallon (dry) is equivalent to 0.156 cu ftSo a 55-gallon drum has a capacity of 55*0.156 = 8.58 cu ftSoil unit weight * drum capacity cu ft = 105*8.58 = 900.9 lbs
10 80# bags will fill about 6 cubic feet, so 375 bags should fill 225 cubic feet (30 x 30 x 0.25).ANS 2 -At least in my area, it would be much cheaper ordering this to be delivered by a concrete truck.An 80 lb. bag of concrete is 2/3 of a cubic ft. of concrete. 3 bags is 2 cu. ft. So for 225 cu.ft. youll need 338 bags of concrete.
50lb bags 3.7 60lb bags 3.1 80lb bags 2.3 90lb bags 2.1 These amounts are for using the redi-mix bags.