128
A game console is not an input or output device, the things that can connect to the consoles are the I/O devices.. not the actual system.
Well, a periphel device is any device that can connect to the outside of a computer system, anything that cannot connect directly to the outside of a computer would be classed as a non peripheral device.
In a mesh topology, each device is directly connected to every other device. To determine the number of cables needed to connect 5 devices, you can use the formula ( n(n-1)/2 ), where ( n ) is the number of devices. For 5 devices, this results in ( 5(5-1)/2 = 10 ) cables. Thus, 10 cables are needed to connect 5 devices in a full mesh topology.
Host controller
I believe you have to connect it under device settings under the settings menu. As headsets are connected this way, if its wireless or not. If its wired, the USB port will generally pickup the device and automatically bring up the register device menu.Please note: YOU WILL NEED AN ORIGINAL PS3 CONTROLLER TO DO THIS PROCESS
To connect a Nintendo 64 controller to a Toshiba device, you would typically need an emulator or adapter. If using an emulator on a Toshiba computer, download an N64 emulator (like Project64) and configure the controller settings in the emulator. For a direct connection, you might need a USB adapter that allows the N64 controller to connect to the USB port of the Toshiba device. Follow the adapter's instructions to complete the setup.
One device that is shared on the network is a router. This is the one that will connect the various devices to the shared network.
A MIDI controller sends MIDI note messages to another device by MIDI cables or USB to a computer. If it is strictly a MIDI controller with no onboard sounds, it will have to connect to another MIDI device or computer to make sounds.
controller
you have to connect ur ipod for the devices to come out.
hub and router
It should sinc if you push the PS button, but if not you can plug the controller into the playstation with the charger and then try againIf the controller is being connected for the for the first time and is not an official Sony ps3 controller and it is a ps3 compatible controller, connect the controller with a USB cable to the ps3, then under settings> device settings> register new device. This is how it works for Wired and Wireless headsets for the ps3 too.This sectional guide answer was modified by TechnoFixunder 'Modified for a wider understanding'.