0
To determine the volume of an 8' x 8' spa, you need to calculate its cubic feet and then convert that to gallons. Assuming the spa has an average depth of about 3 feet, the volume would be 8 x 8 x 3 = 192 cubic feet. Since there are approximately 7.48 gallons in a cubic foot, the spa would hold about 1,436 gallons of water.
What else can I help you with?
How many gallons of water does a Cal Spa hot tub hold?
The number of gallons of water a Cal Spa hot tub can hold varies. Each hot tub in this brand is a different size and therefore can hold different amounts of water.
How much water does a sundance optima spa hold?
485 gallons
How many litters in a 6 person spa hold?
how many litters of water does a 6 person hold
How many gallons of water are in a kidney shaped pool that is 30 x13 and from 4 feet to 6 ft deep with a connecting spa?
30 x 13 x 5.9 (gallons per cubic foot for that particular shape) x 5 (average depth) = 11,500 US gallons, not including the spa since you gave no specifics on the spa.
How many gallons would a typical above ground spa have?
300 to 800 gallons
How many gallons blue spring 600 spa?
Yes.
How much water is required for an average size portable outdoor spa?
The amount of water required to fill an average sized portable outdoor spa is in the region of 265 gallons. This equates to approximately 1000 liters of water.
15ft X 36ft X 4ft pool how many gallons?
16,200 Pool & Spa
Why does the spa water lower when the pool pump turns off and why does the spa water level go down while using the spa if the spa water is approximately 16 inches above pool water level?
The check valve between the spa and the pool is defective.
Is spa water a pure substance?
No spa water is not pure there are other things added to the water
What is the flow rate of a 3500 gallon spa based on a 30 minute turnover rate?
To find the flow rate for a 3500-gallon spa with a 30-minute turnover rate, you divide the total volume by the turnover time in hours. Since 30 minutes is 0.5 hours, the calculation is 3500 gallons ÷ 0.5 hours, which equals a flow rate of 7000 gallons per hour. This means the spa needs to circulate 7000 gallons of water every hour to achieve a complete turnover in 30 minutes.
How do you figure gallons on a swimming pool?
I wanted to know how many gallons of water was in my spa and pool. I used a very simple formula. I bought a 5 gallon bucket at Home Depot and set the hose nozzle to to see how long it would take to fill the bucket. I finally set it to fill the bucket to the rim in one minute. I placed the hose in the spa and set the timer to see how long it would take to fill the spa before it started to overflow into the pool. It took 100 minutes to fill the spa; one hour and twenty minutes; 500 gallons. It then took 2400 minutes to fill the pool; 40 hours; 12,000 gallons of water. I tried the LxWxD and came up with about 18,000 gallons. To double check my work, I tried it with a bucket. The LxWxD answer was wrong. Now I know how much chemicals to add every time I check the hp... Have a good day. Oh, I drained the pool to give it a nice acid wash and replace the lights. Have a good day....George Y
