To convert cubic inches to horsepower, you typically need to know the engine's efficiency and design, as horsepower is not solely determined by displacement. However, a rough estimate is that 1 cubic inch can produce about 0.5 to 0.6 horsepower in a typical gasoline engine. Therefore, 110 cubic inches might yield approximately 55 to 66 horsepower, depending on the engine's specific design and tuning.
45.3cm^3 = 2.76 cubic inches
cc's, like cubic inches, does not determine horse power. There are many other things that contribute to horse power such as the octane of the fuel one uses as well as the type of fuel used, the compression of the engine, cam shaft, fuel system (carb,injector), ignition system, ect..
Horsepower (HP) and cubic inches (ci) measure different concepts and are not directly convertible. Horsepower is a unit of power, while cubic inches refer to engine displacement or volume. However, in automotive contexts, an approximate rule of thumb is that a typical naturally aspirated gasoline engine produces about 1 HP per 15-20 cubic inches. Therefore, 88 HP could correspond to an engine displacement of roughly 1,320 to 1,760 cubic inches, depending on engine efficiency and design.
Chevrolet started the Impala line in 1958. Too many configurations to list all the engines and horse power.
1,728 cubic inches.
68
There are 1,728 cubic inches to the cubic foot
There are 1,728 cubic inches in a cubic foot.
1728 cubic inches = 28316.8 cubic centimeters
2.81 cubic inches.
That is 79.33 cubic inches.
111.92 cubic inches.