For water purification using iodine tablets, typically one tablet is sufficient for one quart (about 0.95 liters) of water. To purify a gallon (about 3.8 liters) of water, you would use four iodine tablets. It's essential to follow the specific instructions on the tablet packaging, as concentrations may vary by brand. Always allow the water to sit for at least 30 minutes after treatment before consumption.
8 tablets
2 tablets
2 tablets
two
Typically, one iodine tablet is used per quart of water. Follow the manufacturer's guidelines on the specific product you are using for the most accurate dosage. Allow the tablets to dissolve in the water for the recommended amount of time before drinking.
It typically takes about 2-3 tablets of chlorine per 10,000 gallons of water, so for a 5000 gallon pool you would need approximately 1-2 tablets. It's important to follow the manufacturer's instructions on the chlorine product for more accurate dosing.
If you have a gallon, you only can have one gallon.
Well, in order to disinfect water, there are many possible solutions. First of all, most people use iodine tablets to kill the bacteria in the water. However, boiling the hell out of water can do something similar.
There are 768 teaspoons of water in one gallon.
One gallon of water weighs about 3.783 kg
There are 231 cubic inches in one gallon of water.
1 gallon = 16 cups 1 cup =0.23 gallon