A standard microhematocrit tube with a capacity of about 75-80 microliters is typically used for performing a white blood cell count.
The motor oil, in your 1998 Ford expedition, should be put in the oil fill tube. The oil fill tube should have a That labels it as the oil fill tube.
Under the hood towards the back of the engine is the trans dipstick tube. You use this tube and a funnel to fill the trans.
Your toilet fill tube may keep running due to a faulty fill valve, a leak in the flapper valve, or an issue with the float. These components may need to be adjusted or replaced to stop the continuous running of the fill tube.
We need to know the dimensions of the tube. The diameter AND the length of the tube. It takes o.465 yards per foot of length for a tube 4 feet in diameter. .
There is a fitting on the outside of your camper or a fill tube. Just put a gardenhose on the fitting for a hose or open the fill tube and pore in water.
You normally fill the transmission by way of the dipstick tube.
A test that shows the sulfer, indole, and motility of a micro organism.
You fill it through the dipstick tube. If it doesn't have a dipstick tube you have to take it to the dealer because it requires a special tool.
They fill the tube from the bottom then seal the end. The cap is already in place when the tube is filled.
Typically, a blood draw tube is filled with about 8-10 milliliters of blood. The amount can vary depending on the specific tests being performed and the size of the tube. The phlebotomist will usually fill the tube to the required volume indicated on the tube label.
IN THE DIP STICK TUBE.....