This harddrive holds up to 20 individual platters.
The number of platters in a 500GB hard disk drive can vary depending on the drive's design and technology. Typically, a 500GB HDD may contain one or two platters, as modern platters can hold a significant amount of data due to advances in areal density. For instance, a single platter might store 500GB, or two platters could each store 250GB. Ultimately, the exact number depends on the specific model and manufacturer.
Drive perimitors means how many sector blocks there are so on a hard disk that 40GB now theres lets say 3 Platters on each of those platters is blocks that where the hdd arm executes electrical signals on a carbon/ teflon coated platter so in term a 40GB HDD has 78,165,360 Parameters sord of like sectors LBA.
Each platter on a hard drive has 2 heads.Every Additional Platter you can multiply x2Example:1 Platter x 2 = 2 Heads2 Platters x 2 = 4 Heads3 Platters x 2 = 6 Heads4 Platters x 2 = 8 Heads5 Platters x 2 = 10 HeadsETC...At least until some new hard drive Architecture comes into place.
There are two types of Hard disk. 1:Sea gate disk 2:SATA Hard disk
1. IDE Hard Disk 2. SATA Hard Disk 3. SCSI Hard Disk 4. Ultra SCSI Hard Disk
i think 10% in hard disk.
form_title=Platters Catering form_header=Keep your catering plans simple with platters! What sort of foods do you want on your platters?=_ How many different platters would you like offered?= {(),1,2,3,4,5,6,7,8,9,10,More} How many guests are you serving?=_ What is your budget for the platters?=_
how many types hard disk drives
Usually only one.
generally one but sometimes you can get two
A hard disk is what all your files, including the Operating System are stored in. There are many sizes of hard disk and what the capacity is.
Most of the enclosure is made out of a metallic alloy however the main part of a hard drive, which stores the data magnetically, is called the platter. In a hard drive there are normally several platters. Platters can store data on both sides requiring a head (reader) for each side. The core of the platters are typically made using an aluminum or glass and ceramic substrate shaped into a disk. Then the disk is coated with a thin layer of a mostly nonmagnetic metallic alloy and on top of this is a protective carbon-based overcoat. Both of these layers are applied in the same process which is called sputtering. The next layer of the disk is a nanometer thin polymeric lubricant applied by dipping the disk into a solvent solution. The surface of the disk needs to be flawlessly smooth so that the disk head can rapidly move over the surface. Scott