16 pounds
Each type of wood has a different weight per unit volume. Some commonly used kinds of wood are pine, fir, spruce and cedar. Pine weight ranges from 27 to 45 pounds per cubic foot. For one cubic meter, multiply by 27. Douglas fir weighs about 33 pounds per cubic foot. Spruce (dry) weighs 28 pounds/cubic foot. Red cedar weighs 24 pounds/cu. foot.
It depends upon the species as weights can very greatly, even among softwoods, such as pine, fir, or especially cedar or cypress. Additionally, moisture content and treatments can impact the finished weight. Southern Yellow pine, fresh cut varys from 36 lbs/cubic foot (20% moisture) to 53 lbs/cubic foot for fresh cut (green). Pressure treating also adds additional moisture, thus weight. If the lumber is from a lumber yard, not treated, kiln dried, dimensional pine lumber would typically weigh 37 lbs / cubic foot, so a 16' 2 x 4, actually 16' 1.5" x 3.5" would be: 1.5 X 3.5 X 192 = 1008 cubic inches 1728 cubic inches in a cubic foot so: 1008 / 1728 = 0. 583 cubic feet weight of pine = 37 lbs/cubic foot X 0.583 = 21.58 lbs for a 16' 2" x 4". or 1 1/2" = 0.125 cubic feet 3 1/2" = 0.292 cubic feet .125 X .292 X 16 = 0.583
On average, 1 board foot of white pine weighs around 2.5 to 3 pounds. The weight can vary depending on the moisture content and specific gravity of the wood.
40
Not enough information, it depends on which Pine you mean, Oregon, Parana, Canadian or Red. They can weigh between 370 and 600 Kgs per cubic meter. You need to state if the timber is seasoned and dry or not.
A 1x3 weighs .47 lbs per foot.So if you have a 8 foot long 1x3 it would be 3.76 lbs
It depends on how they are cut up and the size of them. It also depends on how long they have been drying out. Too many factors here.
The density of pine wood can vary, but on average it is around 30-40 pounds per cubic foot.
Machinery's Handbook lists the density of southern yellow pine at from 52~55 pounds per cubic foot green and 36~41 pounds per cubic foot air dried.You might have guessed that the weight of a chunk of wood will vary a bit depending on its moisture content. (Resin content will affect density as well.) Was it just sawed, or did it just come out of the kiln? Southern yellow pine can weigh 23 to 37 poundsper cubic foot out of the wood storage shed, according to the chart in the Engineering ToolBox. Though that might seem a bit low given other estimates, you can use the link below to educate yourself.If you consult Reade Advanced Materials, they say 45 pounds per cubic foot dry. The Wooden Boat Forum says 43 pounds per cubic foot. The sum of these citations might yield confusion, but a good estimate of a bit over 40 pounds per cubic foot is "safe" and quite usable/useful.
The weight of pine wood varies depending on factors such as moisture content and size. On average, dried pine wood weighs about 25-30 pounds per cubic foot.
The southern yellow pine's weight varies between 32 lbs. per cubic foot and 38 lbs. per cubic foot. The weight of the treatment, if there is one, must be added on top of that, then must be adjusted for the size of the piece of wood.