1) one-slot frame in the Bluetooth transmitter hops is between 791-MHz wide channels with 1600 hops per second.and other hand, 802.11b/g uses the listen-before-talk mechanism.
2) in the baseband layer frame can be of threetypes:
One-slot,
Three-slot,
Five- slot.
A slot is 625 microsecond in a one-slot frame exchange,259 microsecond is needed for hopping and control mechanisms.
A three-slot frame occupies three slots, since259 microsecond is used for hopping, the length of the frame is 3x625 - 259 or 1616 microsecond or 1616 bits . A device that uses athree-slot frame remains at the same hop for three slots. Eventhough only one hop numberis used, three hop numbers are consumed.That means the hop number for each frame is equal to the first slotof the frame.
A five-slot frame also uses 259 bits for hopping, whichmeans that the length of the frame is 5 x 625 - 259, or 2866,bits.
In the below figure, HEADER information is follows bysecond figure
Inversion of a kinematic linkage or mechanism is observing the motion of the members of the mechanism with fixing different links as reference frame. Each time when a different link is chose as the frame link the mechanism shows different characteristics of the motion.
Inversion of a kinematic linkage or mechanism is observing the motion of the members of the mechanism with fixing different links as reference frame. Each time when a different link is chose as the frame link the mechanism shows different characteristics of the motion.
The three main parts of a pistol are the slide, frame, and barrel. The slide houses the firing mechanism and reciprocates during firing, while the frame provides the structure and houses the trigger mechanism. The barrel is where the projectile travels through when the gun is fired.
Frequency Hopping is an old technique introduced firstly in military transmission system to ensure the secrecy of communications and combat jamming. Frequency Hopping is mechanism in which the system changes the frequency (uplink and downlink) during transmission at regular intervals. It allows the RF channel used for signaling channel (SDCCH) timeslot or traffic channel (TCH) timeslots, to change frequency every TDMA frame (4.615 ms). The frequency is changed on a per burst basis, which means that all the bits in a burst are transmitted in the same frequency.
The parts of a window include the glass window pane and the window frame. The window also contains a locking mechanism.
The parts of a window include the glass window pane and the window frame. The window also contains a locking mechanism.
To remove a bike wheel without a quick release mechanism, you will need to use a wrench to loosen the nuts or bolts that secure the wheel to the frame. Once the nuts or bolts are loosened, you can then slide the wheel out of the dropouts on the frame. Be sure to hold onto the wheel as you remove it to prevent it from falling.
By the battery, underneath the seat locking mechanism. Remove the seat, take out the two bolts holding the locking mechanism to the frame and underneath that you will find the fuse box.
The thing that keeps the slide on a j22 frame that won't stay on is the slide catch. It is designed so that the slide mechanism can be locked in place without risk of it moving.
The door may not be closing flush due to misalignment of the hinges, a warped door frame, or a problem with the latch mechanism.
The purpose of the door latch bolt in a typical door mechanism is to secure the door in a closed position by extending into the door frame and preventing the door from being opened from the outside.
An electromagnet crane is considered a frame structure because it consists of a rigid framework that supports the electromagnet, the lifting mechanism, and the load. The frame provides stability and strength to the crane structure, allowing it to safely lift and transport heavy objects using the electromagnet.