0
What else can I help you with?
How would you send a text file to a printer connected to the first parallel port without using a print queue in Linux?
If you will print mostly text, a laser will give much better quality and cost per page.
How do you connect Epson LQ300 plus to computer without parallel port?
first of all plug in usb to parallel printer cable into the computer windows automatically installed found new hardware after that connect the cable into your printer
What are the different ways a printer can be connected to a computer?
Printers are commonly connected by one of three waysOlder printers (and some new ones) are connected by a special cable that runs from the "Parallel Printer Port" on the computer to the printer.Most newer printers can be connected by a special USB cable.Some new printers can also be connected by wireless either directly or via a router. IF ALL ELSE FAILS, READ THE INSTRUCTIONS.
What printer installed so the OS in each computer can communicate with the printer and provide the interface between applications it supports and the printer?
You can use at least two different configuration for your task. First is a shared printer connected to one of computers and shared within its network. Second is to use a network printer which can be connected directly to network. Both of them will give what you want.
Will the Nikon D90 connect to a printer without a computer?
The Nikon D90 will indeed connect to a printer wirelessly, but make sure you have a compatible printer first.
How do you set up a printer for your lap top when you have no DVD set up disc?
To set up a printer without a DVD setup disc, first, connect the printer to your laptop via USB or ensure it's connected to the same Wi-Fi network. Next, go to your laptop's "Settings," select "Devices," and then "Printers & Scanners." Click "Add a printer or scanner" and select your printer from the list. If necessary, download the printer drivers from the manufacturer's website to complete the installation.
Two similar capacitors are first connected in parallel and then in series what is the ratio in the two cases?
Two similar (non-polarized) capacitors connected in parallel will have double the capacitance of one, while two similar capacitors connected in series will have half the capacitance of one, so the ratio is four.
How do you install Network printer on Fedora 10?
To install a network printer on Fedora 10, first, ensure the printer is connected to the network and powered on. Open the "System" menu and navigate to "Administration," then select "Printing." Click "New Printer," and the system will search for available printers; select your network printer from the list. Follow the prompts to configure the printer settings and complete the installation.
How do you set a default printer?
The default printer is changed in Windows by opening the start menu, going to Devices and Printer, and right clicking on the desired printer. Set as default printer is selected to finalize the change.
Why printer queue and printer drivers are required?
A printer driver is a bit of software that instructs a printer how to work. Without such a driver, the printer may not work, or print rubbish. A print queue forms when a print job is sent to the printer that is already printing. Once the first print job has been completed, the second print job is then printed.
Why printer queue and printer driver are required?
A printer driver is a bit of software that instructs a printer how to work. Without such a driver, the printer may not work, or print rubbish. A print queue forms when a print job is sent to the printer that is already printing. Once the first print job has been completed, the second print job is then printed.
How is an multimeter connected to take a measure?
Multimetres are generaly used to measure the following quantities. Voltage: multimeter is connected in parallel with the Load; Current: multimeter is connected in series with Load; Resistance: the resistor must be taken out of the circuit first, then, the probes from the multimeter are connected across the resistor,
