Im a vista user to. What I did to access this is first I opened my control panel went to sounds and i happend to connect mine to my f-drive. So I opend up my f-drive and found out the the program was shut off so I repaired it and it begin to work. If this does not work simply call customer service.
Any webcam with decent sound pickup is preferred, so an example would be the Logitech Webcam C500.
The volume comes from the microphone not the webcam. Unless the webcam has a built in microphone. But even then it's still registered as a microphone and all the volume settings and controls will be in your sound and volume options with the other recording and playback audio controls
Usually there is a small hole, about the size of a large sewing needle. This is where the computer(or Webcam) picks up your sound through a microphone.
In the System Preferences select Sound and then click Input tab. Select your webcam in the list and adjust the Input volume slider. If your webcam is not listed it is probably using the Built in Internal microphone so select that from the list and adjust the volume as required.
you can buy an air hogs hawk eye with picture and video (no sound)
Not without hardware changes really. Webcam speakers are cheaply built and small so the sound quality is usually horrid, plus the power to them is minimal. Using external speakers is about the best solution, and then you can run the sound thru the sound card (or chip) in the computer. I don't know if some webcam's come with an external speaker jack, I'm sure more expensive ones probably do, but you should be able to run the sound thru external speakers, most preferably a set with a powered sub-woofer if you want decent sound.
They have changed the camera recently. Sound will be coming back but, no firm date has been set for this.
If you have a webcam there should be a little webcam icon directly underneath your display picture, and you click that. When you click that, it should say "show my webcam" and "start a video call." If you would like to talk to the person using a microphone (if you have one) and see them at the same time, you click "start a video call." If you just want to work your webcam, then you click "show my webcam." You should then see yourself where your display picture normally is once the webcam has started working.
If the sound bar is moving (using a video chat program like aim, it will have two sound bars - one for sound and one for a microphone), then you might need to plug in additional speakers/headphones to your computer's headphone jack. I am not sure how to change the settings so that the webcam's own speakers can be used, but I'm sure it's possible.
To turn on the webcam on an Asus VK228 series monitor, you typically need to ensure it's connected to a computer and that the appropriate drivers are installed. For the speakers, check the audio output settings on your computer to make sure the monitor is selected as the output device. Also, adjust the volume settings on both the monitor and your computer to ensure sound is enabled. If issues persist, consider checking the monitor's settings menu for audio options.
Yes. All new laptops come with a built-in microphone.
lol i have the same laptop... and sometimes the same problem.. i use msn to chat with my friends... and that's when i get the problem with my webcam.. and i just restart my computer and try it again! and it works 90% of the time xD when i do that =)