This is a codec issue. Try K-lite codec pack. I run XP and WMP11. It can run almost evrything perfectly.
http://www.free-codecs.com/download/K_lite_codec_pack.htm
A strobe light is typically a halogen bright white light with a timer on it that turns on and off the pulse of the light to create a strobe effect on it.
Answer=1.A Strobe is a light that flashes on and off continuously.
Two methods, one uses a dial that is held in the center of the revolving shaft and is directly read off of the dial face. The second method uses a strobe light. The light is focused on the shaft and the dial on the strobe is turned until it looks like the shaft has come to a stand still. The RPM is read off of the meter face of the strobe light.
A strobe light
The power output of a strobe light can vary depending on the size and type. Typically, a strobe light used for photography or small events can range from 25 to 400 watts, while larger strobe lights for professional events or concerts can range from 500 to 2000 watts. It is important to check the specifications provided by the manufacturer to determine the specific wattage for the strobe light in question.
You may be able to find a strobe light at a party store, like party city. A really good place to find a strobe light would be at Spencer Gifts. They usually carry things like that in their stores.
it can be very bright lol
Whelen Strobe is a brand of lights, specializing in strobe light technology. The company, Whelen Engineering Company Inc., was established in 1952 in New Hampshire.
There must be at least one strobe light location marked at each end of the MOS.
the only way to test one is to put the bulb in the strobe housing and apply recommended power.
Flash, strobe, spotlights and photofloods are all sources of Artificial Light.
You must always be careful when using strobe lights, but they can be lots of fun. You can find great lighting equipment at www.eliminatorlightingdirect.com