Well... kind of.
Getting a PC to shut down at a specific time is not all that hard. Getting it to start at a given time is more complicated, since if it's off it can't be running the program to tell it to start. However, some PCs do have a feature that allows them to go into a "sleep" mode and "wake" when they receive a specific signal.
There are also "nannyware" programs that can be used to restrict computer use to specific time periods, outside of which the computer cannot be used without supplying an override password (it's still ON, you just can't use it to DO anything). I've never personally used one, so I can't vouch for how well they work, but I know they exist.
shutdown -m \\computername - Remote computer to shutdown/restart/abort shutdown -t xx - Set timeout for shutdown to xx seconds
Depends on how it's programmed. Electronic motors can be set up with an idle shutdown timer which can be set at whatever interval the person doing the programming wishes. If there is no idle shutdown timer, the truck can idle until it's out of fuel. Idling is not a recommended practice, however - at low idle, insufficient force is generated by the pistons to force all of the carbon (a byproduct of fuel combustion) out of the pistons, and the end result is a carbon ridge which forms at the top of the cylinder.
on a Microsoft Windows computer, you will find a setting in the Power settings (in control panel). most of the time, it is a timer in minutes. set the number to 00. this will stop the timer.
set timer zodiac lm2
To set up a timer for lights in your home, you can purchase a plug-in timer device from a hardware store. Simply plug the timer into the outlet, then plug your lights into the timer. Set the timer according to your desired schedule, and the lights will turn on and off automatically at the designated times.
with a home lamp timer
To set a timer for outdoor lights, you can use a programmable timer switch. First, plug the lights into the timer switch, then set the desired on and off times using the timer's controls. Make sure to follow the manufacturer's instructions for proper setup and programming.
To set a timer for a light switch, you can install a timer switch that allows you to program when the light turns on and off. Simply follow the instructions provided with the timer switch to set the desired time intervals for the light to operate.
To set up a programmable light timer for your home lighting system, follow these steps: Plug the programmable light timer into an electrical outlet. Set the current time on the timer according to the instructions provided. Program the timer to turn the lights on and off at specific times using the timer's settings. Plug your lights into the timer's outlets. Test the timer to ensure it is working correctly. By following these steps, you can easily set up a programmable light timer for your home lighting system.
You need to turn the timer handle hars in a clockwise motion
The timer in Pictionary is typically set for one minute.
Yes, this television can be set to turn on and off using the timer function. Just set the time in the menu.