yes
PATA (Parallel ATA) and Molex connectors serve different purposes in a computer's architecture. PATA is used for connecting hard drives and optical drives, while Molex connectors are typically used to supply power to these drives. PATA drives can be powered using a Molex connector, but they also require a separate data cable for the PATA interface. Therefore, while they are connected in terms of functionality, they do not directly connect to each other.
yes. pata and ide are the same thing.
Molex is the power plug type used for hard drives and CD drives in older PATA-type PC's. Berg is the same, except used for floppy drives.
All PATA (Parallel ATA) drives use the Molex 4-pin power connector. This connector provides the necessary power to the drive, supplying +5V and +12V to operate. The Molex connector is typically used for older hard drives and optical drives before the transition to more modern interfaces like SATA.
A technician is installing a new power supply in a computer Which type of power connector should be used to connect to a PATA hard drive?berg mini-molexmolex.20-pin ATX connector
Yes. If your computer does not support PATA directly, you will need to purchase a PATA to SATA adapter board.
There are two kinds in common use:Molex - an older standard, but still commonSATA - Serial ATA, a newer standardSee the related links for pictures.
A PATA connector
Yes, there are two PATA connectors available on the motherboard, so you can connect PATA hard disk through this motherboard.
There is difference between SATA and PATA HDD but no difference between the formatting..
There are many different features that are special about the Pata Hard Drive. These special features include, but are not limited to, they are older, and their max capacity is 250 GB.
Six Hard Disk.