0
What else can I help you with?
What part of the operatin system stored on rom?
The part of the operating system stored in ROM is typically the firmware, which includes the bootloader and essential system utilities required to start the computer and load the operating system into RAM. This firmware is critical for initializing hardware components and performing basic system checks before handing control over to the operating system. Unlike software stored on a hard drive, firmware in ROM is not meant to be modified frequently, ensuring that the system can reliably boot up.
Where are the software licenses stored on computer?
It is stored in the Registry -- Click START then Click RUN -- Type in REGEDIT and it will take you into the REGESTRY --- Wildbilly Oki
The area that holds all the startup instructions the computer needs to start is the?
The area that holds all the startup instructions a computer needs to start is the BIOS (Basic Input/Output System) or UEFI (Unified Extensible Firmware Interface) firmware. This firmware is stored in a non-volatile memory chip on the motherboard and is responsible for initializing hardware components and loading the operating system during the boot process.
Software controls the overall activity of the computer?
Your operating system, which is software controls 99.9% of how your computer acts. Every program is computer code. The other .1% are the programs that run when you start your system called booting up, that starts your operating system. That is called firmware because it cannot be deleted, but it is still software.
What is the difference between computer software and computer operating systems?
Computer software is data on your hard drive that the processor reads and executes. Software is a bunch of instructions telling your computer what to do. The operating system is a piece of software that gives the computer user a way to interact with the computer. When you turn on your computer, it starts your operating system. You can start other software programs like Microsoft Word or Internet Explorer in your operating system. The above post is basically saying that both are the same thing, this is not the case, software is data that is used to control and use programs stored on your hard drive, an operating system is actually mediumware, it is permanently stored on your storage device (normally hard drive) and very few changes can be made to it legitimately without the developers prior consent, mediumware works a little bit like firmware, it tells the components how to react when given commands, the difference would be that an operating system can control things globally whereas firmware is designed for 1 or 2 functions dependant on the hardware it is installed on. So essentially software is programs installed on your computer to make life using it easier, whereas an operating system will make it possible for the software to interact with your hardware. So essentially you have hardware which is controlled by its firmware, the firmware is what the operating system (mediumware)uses to control the hardware, and the software is the part that interacts with the operating system (mediumware) to make it possible for anyone to use the hardware in a nutshell.
How did computers work without software?
Programmable digital computers have never worked without software (or firmware). Even ENIAC used a form of firmware to work, it had to have programs wired into it by hand from 1945 to 1948, then from 1948 on software was loaded by manually setting hundreds of rotary switches.All modern computers can only do one thing without software: start a preloaded bootstrap program running. The bootstrap program is a piece of software (or firmware) that tells the computer how to set itself up, find the OS software, and start the OS software running. This preloaded bootstrap program is either entered manually by the operator at turnon (very rare anymore) or resides as firmware in a ROM loaded at the factory.
What holds the basic software needed to start a PC on a motherboard?
It is called Firmware and it holds the basic software needed on the motherboard.
What is the advantages of having the utility stored on a bootable CD?
If your computer caccnot bott from its hard drive for any reason - having a bootable CD will allow you to start your computer to a level where you can run diagnostic software.
What is a form of firmware that contains the computer's start up instructions?
Basic Input Output System (BIOS)
How can you view all the profiles stored on a Windows XP computer?
Start, then right click my computer, select properties, then click the advanced tab under User profiles A+ Guide to Software answer To view all profiles stored on a Windows XP computer, use the System Properties window. Click Start and then right-click My Computer. Select Properties and then click the Advanced tab. Under User Profiles, click the Settings button. For a Windows 2000 computer, in the System Properties window, click the User Profiles tab. A+ Guide to Software TEST answer
How do you restore a samsung SGH-i437p to stock firmware?
To restore a Samsung SGH-i437P to stock firmware, you'll need to download the official stock firmware for your device along with the Odin flashing tool. Connect your phone to a computer in Download Mode (by turning off the device, then pressing and holding the Volume Down, Home, and Power buttons simultaneously). Open Odin, load the firmware files, and ensure your device is recognized. Finally, click "Start" in Odin to initiate the flashing process, which will restore your phone to its original software state.
Where would the information be stored to start a computer?
Some is stored in ROM; most of the information is typically stored on the hard disk, from where it is loaded into RAM.
