If your goal is to perform a hard reset of the DS Lite's system and clear the data, then a solid method involves taking out the DS Lite's battery pack. This battery pack has to be disconnected for at least ten seconds to get the system to fully reset.
Most Compaq computers do not have a dedicated reset button. Instead, if you need to reset the system, you can typically do so by holding down the power button until the computer shuts off and then turning it back on. For some models, a reset may also involve using specific key combinations during startup. Always refer to the user manual for your specific model for detailed instructions.
To reset a Frigidaire oven using the reset button, locate the reset button on the control panel. Press and hold the button for a few seconds until the display resets. This should restore the oven to its default settings.
Hold down the Power Button at the back of the Mac on the side. (probably left)
To reset the screensaver or desktop keypad on a Palm 700p, go to the "Preferences" application from the main menu. Select "General" and then look for the "Screen" options where you can adjust the screensaver settings. If you're looking to reset the device itself, perform a soft reset by pressing the reset button located on the back of the device using a stylus. For a hard reset, press and hold the "Power" button while simultaneously pressing the reset button.
To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.
To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.
There is no reset button. The alarm is disarmed by using the remote or turning the key in the door lock.
To reset your TomTom XL, press and hold the power button for about 15 seconds until the device turns off. Then, release the button and press it again to turn the device back on. If you want to perform a soft reset, simply hold down the reset button (located at the back) using a pin for a few seconds. This can help resolve minor issues without erasing your data.
To reset "Maintenance Notice" on the display, turn the ignition key to ON, with engine off. Select the "Maintenance Schedule' key by using the button to right or left. Using the button select the "Reset" key and push the "Enter" button.
To hard reset a Polaroid RBD-V8A20 tablet, first, ensure the device is powered off. Then, press and hold the Volume Up button and the Power button simultaneously until the Polaroid logo appears. Release both buttons, and use the Volume buttons to navigate to the "Wipe data/factory reset" option in the recovery menu. Select it using the Power button, confirm your choice, and follow the prompts to complete the reset.
If you keep your fingers on the home button and the lock button at the same time for 10 seconds, your iPod shout reset.
No, it cannot. You could, however, trip the circuit using the TEST button before plugging or unplugging the device in question.