RAMBUS memory is on a stick of RAM called a RIMM. It is the fastest RAM available but you have to have the hardware to use it. It comes in 184 pin for desktops and 160 pin for laptops. RIMMs are keyed differently than DIMMS so you can't install it in any computer. You are required to install RIMMs in pairs to use the full technology, it has a dual-channel technology. Each RIMM is 64 bits wide, but the RAMBUS alternated between two sticks to increase the speed of data retreival. RDRAM motherboards require that all RIMM slots be populated. Unused pairs of slots need a passive device called a continuity RIMM (CRIMM) installed in each slot to enable the RDRAM system to terminate properly. In other words, you have to buy a blank CRIMM to fill in the slots or it will not work properly on the motherboard.
think about it and then give me the answer
If you are reading this chances are you are working on LAB 7.2 EXPLORE THE KINGSTON WEBSITE....... its a good website..... so use it!!!! LOvE, me
RIMM (Rambus Inline Memory Module) and DIMM (Dual Inline Memory Module) are two different types of memory technologies, and they are not compatible with each other. RIMM modules require a specific motherboard that supports Rambus technology, while DIMM modules are used in systems that support DDR, DDR2, DDR3, DDR4, or DDR5 memory. Therefore, you cannot use RIMM in a DIMM system. Always check your motherboard specifications to ensure compatibility with the memory type.
The motherboard's manual will provide you with any jumper settings that might be used to set the RAM's speed the main thing is to not get to much that can actually slow things down.
When you install three good RIMM (Rambus Inline Memory Module) modules into a compatible system, the system will recognize the memory and utilize it to enhance performance. However, for optimal functionality, the motherboard must support RIMM configurations, and they should ideally be installed in pairs or in accordance with the motherboard's specifications. If the system supports triple-channel memory, it may take full advantage of the additional bandwidth offered by three RIMMs. Otherwise, the system will operate with the available memory while potentially underutilizing the available RIMM modules.
RDRAM (Rambus Dynamic Random Access Memory) offers higher bandwidth and faster data transfer speeds compared to other memory technologies like SDRAM. It was designed for high-performance applications where data-intensive tasks require rapid memory access. Additionally, RDRAM's architecture allows for multiple memory modules to be used in parallel, further increasing the overall system performance.
All RIMM slots must be filled either with RIMM modules or CRIMM modules."23. Fill 'er up. Leaving a memory slot empty is not a problem as long as you install DIMMs. If you install RIMMs in your system, however, then you need to make sure every slot is full. No, you don't have to buy more of the pricey Rambus memory modules; simply use a pair of CRIMMs (continuity RIMMs), as they're called, to plug the empty memory slots on the motherboard. You can buy CRIMMs for $10 to $15 each from computer retailers. Failing to fill empty Rambus memory slots with CRIMMs will result in a computer that doesn't boot."Taken from http://www.smartcomputing.com/editorial/article.asp?article=articles/archive/l0909/27l09/27l09.asp&guid=
RDRAM (rambus dynamic RAM) was first developed for the Nintendo 64.
drivec is for the memory
That's correct, it will upgrade your video memory and not your system memory.
No it is RAM memory used by the operating system
answer