answersLogoWhite

0

It depends on the hardware you have. if you have only SATA in your computer you can buy an IDE to USB external case then you can install the IDE drive into the case for an extra drive or backup

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

Can you Transfer files from a sata drive to ide drive?

Yes you can transfer files if your motherboard support both types of drives, if it has the connectors both for sata and pata (ide). If it supports only sata than you can do so by connecting your ide via usb port with a commercially available usb card and cable with its own power supply. Regards Rizwan Ghafoor


What does and IDE to SATA adapter do?

One would use a SATA to IDE adaptor for things such as backing up data, virus scanning and imaging. These adapters can be purchased from places like Best Buy, Tiger Direct, Amazon and eBay.


What are the disadvantages of SATA?

No disadvantage one disadvantage is that you can't use it in an IDE only box. --- Sata drives can be used in an IDE only computer using a cheap sata to IDE reversible interface. IDE<>SATA SATA<>IDE Another disadvantage is that serial devices driven at high speed can be subject to interferrance if the cable length is too long. This is not unique to SATA (IDE suffers from this too) But until an alternative system such as Fibre optics cable is introduced it will limit lead length. ---


Does the SATA speed make any difference in transferring large files from my hard drive?

The speed difference betwen SATA and IDE devices won't be noticeable to the average user, but when especially large files come in to play, you will likely notice some difference. This is especially true if you use more than one drive on an IDE channel!


Does an hp pavilion xt926 have an SATA port?

No, it does not. It only has 2 IDE Ports. But you could buy a PCI Card with SATA ports.


Is acer aspire 5610-4491 hard drive ide or sata?

sata


Is the hard drive IDE or SATA?

This partica\ular hardrive is a SATA model.


Should ide be master or slave with sata master?

SATA and IDE are operated on different buses, with different controllers. A SATA drive is not considered a "master" or a "slave"; it has a channel all to itself. If the IDE drive is by itself on the controller, it should be set as Master.


Can SATA be connected to ATA?

Yes, technically speaking. You need an adapter (SATA to IDE converter) to do this. Google sata to ide converter and you'll find adapters starting around $15 bucks.


Can a SATA optical drive be used Instead of an IDE optical drive?

Yes. But your computer needs to be properly configured for a SATA optical drive. Also, a SATA drive is better than a IDE drive.


Can you replace eide hard drive with a sata hard drive?

No. IDE Hard Drive cannot be replaced with a Sata Hard Drive because the connectors are different. example. if you have sata hard drive installed on your machine. and you purchase IDE Hard drive. you won't be able to install the IDE hard drive where the Sata hard drive was because the IDE connectors are a different shape and size towards the Sata hard drive connectors.


Can you use a USB cable to connect laptop hardisk that was already taken out of the laptop and then connect it to another laptop?

Yes you can, but u need the USB/IDE or USB/Sata Extention which is a box with a small electronic device in one edge u see the usb and in the other u see the IDE pins or Sata, so u attach the HD to the pins that's all. you can buy this device for 10 $ i think it's available No drivers