Switch to Switch with UTP requires a crossover cable. Straight-through cables generally will not work unless one of the switch ports is specifically designed to operate in DTE mode.
A switch, UTP straight through cables,Lan Card
To connect a PC to a switch you should use a straight through UTP cable.
it is a point where a UTP cable connects to the device
IF You are Use Normal Cabling Then Following B Cat. Color Coding and IF You Use Cross Cable then Use A Cat. Color Coding for Punching The Cable.. Deepak Kumar Verma IT Engineer INS E Solution Pvt. Ltd. 9214012330, 8875332931
Typically a straight thru UTP cable can be used.
Unshielded Twisted Pair (UTP) cables typically consist of four pairs of wires, each with a specific color coding. The standard colors for these pairs are blue and blue with white stripes, orange and orange with white stripes, green and green with white stripes, and brown and brown with white stripes. This color coding helps in identifying and terminating the wires correctly for networking purposes. Each pair is twisted together to reduce electromagnetic interference.
Purchase a 16 port switch and connect the utp cable coming from the ISP to the uplink terminal of the switch. Now connect each individual notebook to switch using the UTP cable and leave the IP address to be assigned by DHCP
UTP stands for 'unshielded twisted pair'. These cables are usually found in Ethernet networks and telephone lines. They are also sometimes found as part of a security network.
UTP
UTP Is unshielded and STP is shielded UTP generally being bulkier and more expensive.
crossover cable
Straight through ethernet cable (CAT 5/5e/6)