Anyone have prob w/ sentra power window? Won't go up or down. IF YOUR WINDOW IS NOT MOVING AT ALL(UP OR DOWN) IT IS YOUR MOTOR BUT IF IT IS MOVING EITHER UP OR DOWN, MEANING IT WILL MOVE ONE DIRECTION BUT NOT ANOTHER THEN IT'S YOUR SWITCH
it disapears
The 'View' pull-down menu is helpful.
You didn't indicate whether this problem happens while the vehicle is not moving as well as moving. My guess would be moving, meaning looseness in the window switch which causes contacts to close (touch) activating the window motor due to the vibration and up down motion of the vehicle.
press and hold the window button down pause one second after the window has stopped moving at the bottom of travel. then press and hold the window button in the up position pausing again after the window has stopped moving. then a message will come up stating window set. repeat for all windows and sunroof.
The scroll bar at the right side of the window allows you to move the visible part of the data up and down as desired. Vertical scroll bar
A power window relay switch relays the power from the car's battery, to the switch itself, and then to the window motor. When pressing the button inside of the car it allows the power to go from the relay switch to the motor and roll the window up or down.
The scroll bar is found along the bottom and right side of any browser window and allows you to "scroll" to content. Fun Fact: Web designers can make a scroll bar be the same color used as the background of a web page.
there might be something mechanically wrong withe the window itself. ie the regulator arm is jamming or needs lubricating.
Hold the down button until the window stops moving. Continue holding it for about three seconds until you hear a click. Hold the up button until the window stops moving and continue holding it for another three seconds until you hear another click. That's it. You're done. Repeat for the other window if necessary.
To find the manufacturer of a window, look for a label or stamp on the window frame that includes the manufacturer's name or logo. You can also try contacting the retailer or installer of the window for this information. Additionally, you can search online using any identifying numbers or codes on the window to track down the manufacturer.
Most likely it is the regulator, either the cable is broken or the plastic at the top broke and the cable became unspooled and wrapped around itself. The window is held in by two screws that tighten a clamp on the window that holds pretty tight so it is doubtful it is that.