A fax machine is considered both an input and output device. It receives data as input (the document being faxed) and sends the data as output to another fax machine.
The 'pipe' symbol connects the output of one command to the input of another (|)
The rule appears to be a linear relationship between the input and output values. When the input increases by 4 (from 1 to 5), the output decreases by 4 (from 5 to 1). Similarly, when the input increases by another 4 (from 5 to 9), the output decreases by 4 again (from 1 to -3). Therefore, the rule seems to be that for every increase of 4 in the input, the output decreases by 4.
It can be classified as both. It receives output from one device. It boosts the power and sends it as input to another device.
is an omr and input or output device?
both input r output
No, input and output are not always equal. The output is the result of processing the input data based on a specific operation or algorithm. Depending on the operation or algorithm, the output may differ from the input.
If the output power is 70% of the input power, then the output is roughly 1.55 dB downcompared to the input.If the voltage at any point of the output waveform is 70% of the voltage at the same pointon the input waveform, and the input and output impedance are equal, then the output is3.1 dB down (rounded) compared to the input.
A table in which you put in a number and out comes another number. Usually more than one groups of numbers. And almost ALWAYS follows a rule such as: Input x3=Output or Input -23= Output Input | Output 2 | 4 10 | 20 16 | 32 In this table you can see that the rule is Input x2 = Output Hope This helped!
Input device.
If it is an adapter then logically it should be adapting from one thing to another so no the output will not be the same as the input.
it is an output device