0
What else can I help you with?
What are the Three types of physical cables that carry a signal?
fiber optic cables, coaxial cables, and twisted pair cables.
What is the closest acceptable distance for signal cables to be run next to power cables?
6" FULLSAIL
What causes humming at PA system?
It could be... Signal cables crossing electrical cables , bad earthing on the equipment , a signal loop eg feedback , static , intaferance ( due to poorly shielded cables ) or a bad connection
What is the form of signal in coaxial cables?
Coal and Iron elloc72
How do you use a wired router?
A wired router is able to spilt the Internet signal and send it down Internet cables or Ethernet cables. It is capable of sending the signal to many different computers.
What the technical term for the kind of cables that carries a TV signal?
Coaxial
Do I need HDMI Cables for my HDTV, or can I use the component cables that came with my HD cable box?
You don't need HDMI cables for an HD signal, but if you want to get maximum resolution for your tv (1080 p) you do. The short answer is no, you do not need HDMI Cables just to get an HD signal. BUT HDMI cables transfer the higher-resolution images at a faster rate, giving you a much better picture.
Do CAT6 cables provide better signal strength than CAT5?
CAT6 cables do provide better signal strength and bandwith than CAT5, but for most purposes CAT5e will work just as well and be cheaper.
Multiple wrapped cable splice?
Multi strand cables that can be spliced include unshielded and control cables, shielded signal and control cables, and 1000 volt cables. Special kits to splice these types of cables are sold by companies like 3M.
What is the difference between ribbon cables and power cables?
Ribbon cables are mostly, but not always lower voltage signal carriers. Power cables are mostly larger and carry higher voltage to various parts tht need it.
What cables carries the signal from a cable modem to a PC. Is it Ehternet or Coaxial?
Ethernet
Which cable used for traffic light singnal?
Traffic light signals typically use multi-conductor cables, often referred to as traffic signal cables or control cables. These cables are designed to handle low voltage and usually consist of multiple insulated conductors to connect the signal heads to the controller. They may also include shielded cables to reduce electrical interference, ensuring reliable operation of the traffic signals.
