A DB9 connector on your computer has one specific function, interface with one serial device.
Not sure, but Dodian ( some rs priv server ) uses port. 43594
SSH uses such port.
The connector is usually a DB9, though it's possible that not all 9 pins will be used.
IMAP uses port 143
A rollover cable is typically used to connect from a DB9 serial port on your computer to the RJ45 console port on the router. An RJ45-RJ45 rollover can be used from Aux port to Console port or from the ports on a 2509-RJ/2511-RJ to a console port.
Take to dealer and get a service! Or a "scan tool" may allow you to clear it using the diagnostic port. Though finding one that suits a Auston martin db9 may be hard
Plug the included serial connection (RS-232, DB9) into the male DB9 port on the back of a computer. You need to install the software that come with the scanner too. Once I plugged mine in, it connected right away no problems and was able to read codes from the scanner from the computer. If you don't have a serial port, you can get a RS-232 to USB adapter to use with a USB port. J. Frontbutt
everything from the space shuttle to marine systems PC's and Mac and even some cars have some sort of port expander as it is defined
USB Port
The Aston Martin DB9 was launched in 2004.
The client process needs a temporary port number. It tells the server to which port to reply (the TCP or UDP header includes information about the source and the destination port). The client, on the other hand, doesn't know in advance what port the server uses - unless the server uses a standard port number.The client process needs a temporary port number. It tells the server to which port to reply (the TCP or UDP header includes information about the source and the destination port). The client, on the other hand, doesn't know in advance what port the server uses - unless the server uses a standard port number.The client process needs a temporary port number. It tells the server to which port to reply (the TCP or UDP header includes information about the source and the destination port). The client, on the other hand, doesn't know in advance what port the server uses - unless the server uses a standard port number.The client process needs a temporary port number. It tells the server to which port to reply (the TCP or UDP header includes information about the source and the destination port). The client, on the other hand, doesn't know in advance what port the server uses - unless the server uses a standard port number.
there are 4 seats in an Aston martin db9