The ssid is used for identifying you wireless network so you can see which network is your and which is your neighbors
The exact method to disable the broadcast of your SSID will vary depending on your router. Most routers have an option directly within the settings which will allow you the option to mask the broadcast of your SSID.
There's an option to manually enter the SSID, you can enter it there. Or you can unhide the SSID temporarily to just let the PSP connect and save the settings, then you can hide it again, but the PSP can still connect.
SSID
The SSID (Service Set Identifier) is typically stored in the firmware of a wireless router or access point. It can also be saved in the configuration settings of the device, which can be accessed through the router's web interface. Additionally, when devices connect to a Wi-Fi network, they may store the SSID in their operating system settings for future connections.
To find the SSID (Service Set Identifier) for a wireless network, check the label on your router, as it often displays the default SSID. Alternatively, you can access your router's admin interface by entering its IP address in a web browser and logging in with your credentials; the SSID will be listed in the wireless settings. Lastly, you can also find available SSIDs by scanning for networks on your device's Wi-Fi settings.
the SSID
The SSID (Service Set Identifier) is typically found in the device's Wi-Fi settings or network settings menu. On smartphones, tablets, and computers, you can access this information by navigating to the Wi-Fi section, where it will display the available networks along with their respective SSIDs. Additionally, the SSID may be visible on the device's screen when it is connected to a Wi-Fi network.
A 802.11 Service set Identifier is not installed, it is automatically assigned during the manufacturing process and is broadcasted when a Modem/Router is initialized as the Wireless Access Point. The SSID can be changed in the modem/router settings.
SSID does not have to be different but the password must. But if you have multiple networks with same name but with different passwords it will take you couple attempts to connect to a correct one.
You should log on as administrator in your router, go in the router settings one of the fields should have the name SSID (some companies do not use such name, you will have to read the manual to find the required information).
You should log on as administrator in your router, go in the router settings one of the fields should have the name SSID (some companies do not use such name, you will have to read the manual to find the required information).
To rename the network name (SSID) you will need to log in to your router, this is often done with a web browser (if the router did not come with its own software) using the routers address (which often starts 192.168.... ), enter the password to access the router's configuration settings and find the Network name/SSID section to enter the new name.