The color code of the wires in the power supply is: Red = +5V Black = Ground (0V) White = -5V Yellow = +12V Blue = -12V Orange = +3.3V Purple = +5V Standby Gray = power is on (output) Green = Turn DC on (input)
Black wires are typically used for power supply, white wires are used for neutral connections, and green wires are used for grounding in electrical wiring.
How else would you get electricity from one point to another? The wires or conductors conduct power from where it is generated to where it is used to power the many things you use in your day to day life.
In the construction trade, bus wire is used for the feeders that connect the two wires on a blasting cap to the power supply. The other end of the bus wire is connected to the hand generator that is used for a power supply to energize the blasting cap.
H1 and H2 wires are commonly used to refer to the high voltage (H1) and low voltage (H2) wires in electrical systems. H1 wires carry the higher voltage and are typically used for the main power supply, while H2 wires carry lower voltage and may be used for control circuits or secondary power sources.
The voltage on a red wire from a power supply typically depends on the specific power supply being used. Common voltages for red wires in power supplies include +5V, +12V, and +24V, among others. It is important to check the specifications of the power supply to determine the exact voltage.
Black wires are typically used for power supply, while green wires are commonly used for grounding. White wires are usually neutral wires in electrical systems. It is important to follow proper wiring color codes to ensure correct connections and safe operation of electrical devices.
If a 200 mA power supply is used on a circuit needing 2 amp it would overload the power supply. Two amps equates to 2000 milliamps. Trying to pull 2000 milliamps from a device that is only capable of supplying 200 milliamps is not advisable. The excessive current draw would most likely burn the wires open and render the power supply useless.
three wires
No because they have different connectors.
Two technicians are building a computer system. Technician A says that the case power switch is used with the AT power supply. Technician B says that wires from the case power switch are connected to the system board. Which of the following statements is correct? A. Only Technician A is correct. B. Only Technician B is correct. C. Both technicians are correct. D. Neither technician is correct.
the power supply provides electricity to each component to the computer and ensures that neither too much or too little power is delivered. it is generally box shaped with many wires coming from it which will be used to connect to each component of a computer
The type of power supply being used (AC or DC) should match the power requirements of the device it will be supplying power to.