answersLogoWhite

0

safety precautions!

A few warnings and reminders before you start disassembling your computer tower to keep both your unit and yourself safe

1. Fully shut down and unplug the computer before you make any attempts to disassemble the tower.

2. Take off any metal objects on your arms or fingers such as bracelets, rings or watches. Even if your unit is unplugged, there may still be some remaining electric charge.

3. Make sure your hands are completely dry to avoid damaging any mechanical parts as well as to avoid electrocution.

4. Work in a cool area to avoid perspiration for the same reason as seen in the previous number.

5. Before touching any part within the tower, put your hands against another metal surface (such as the computer casing) to remove static charge, which may damage sensitive devices.

6. Prepare a place to keep any screws you may remove. A container or piece of paper with labels for each part (casing, motherboard, CD drive, etc) is ideal to avoid confusion between the similar-looking screws.

7. Handle all parts with care. Place each piece you remove carefully down onto a stable surface.

8. If a component does not come out easily, do not forcefully remove it. Instead, check that you are removing it correctly and that no wires or other parts are in the way.

9. be careful when holding the motherboard, its underside actually quite pointy and able to hurt you.

10. Never attempt to remove the power source, a box attached to the side or bottom of the unit to which all cables are connected.

11. When removing any cables, wires or ribbons, make sure to grasp the wire at the base or head to keep it from breaking.

12. be careful not to drop any small parts (particularly screws) into unreachable areas such as into the computer fan or disk drive.

13. Take note that the three of the most damaging things to a computer are moisture (sweat, drinking water), shock (electric or from being dropped) and dust (any debris from household dust to bits of food).

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What are the safety precautions of assembling system unit?

Seek guidance from the supplier or manufacturer.


How long is the commanders safety course?

The Army Commanders Safety Course is a course for unit leaders and commanders. It is a tool to help ensure leaders and commanders follow all safety precautions.


I need the answers to Unit 603 2GEn3 in hospitality?

the elements of the safety management system


Which are the precautions you will take to avoid failures in strategies if you are the general maanger of a production unit?

Which are the precautions you will take to avoid failures in strategies if you are the general maanger of a production unit?


How can I properly remove a garbage disposal unit from my sink?

To properly remove a garbage disposal unit from your sink, first turn off the power to the unit. Then, disconnect the unit from the sink and plumbing. Use a wrench to loosen the mounting assembly and remove the disposal unit. Be sure to follow the manufacturer's instructions and take necessary safety precautions.


How do I add refrigerant to my AC system?

To add refrigerant to your AC system, you will need to locate the service valves on the system, typically found near the compressor unit. Attach a refrigerant gauge and hose to the low-pressure service valve. Start the AC system and slowly add refrigerant until the pressure reaches the recommended level. Be sure to follow safety precautions and consult a professional if you are unsure.


What are some important safety precautions to consider when attempting a DIY HVAC repair or installation?

When attempting a DIY HVAC repair or installation, important safety precautions to consider include turning off the power to the unit, wearing protective gear like gloves and goggles, ensuring proper ventilation, following manufacturer instructions carefully, and having a fire extinguisher nearby.


Is the can opener easy to disassemble for cleaning or is it one solid unit?

The Oster 3151 can opener is a soild unit and should not be taken apart to clean.


How do I install a window AC unit?

To install a window AC unit, first measure the window opening to ensure a proper fit. Place the unit on the windowsill and secure it with brackets or screws. Close the window onto the top of the unit to hold it in place. Plug in the unit and adjust the settings as needed. Make sure to follow the manufacturer's instructions for proper installation and safety precautions.


How do you change a pickup destributor?

you must remove the distributor, disassemble unit and replace pick up coil


How do you disconnect alarm on 1996 ford galaxy?

To disconnect the alarm on a 1996 Ford Galaxy, locate the alarm control unit, usually found under the dashboard or near the fuse box. Disconnect the wiring harness from the alarm unit to disable it. Alternatively, you can remove the fuse associated with the alarm system, which is often labeled in the owner's manual. Always ensure to follow safety precautions when handling electrical components.


How do I add refrigerant to a window AC unit?

To add refrigerant to a window AC unit, you will need to locate the service valve on the unit, connect a refrigerant charging hose to the valve, and slowly add the appropriate amount of refrigerant as specified by the manufacturer. It is recommended to consult a professional technician for this task to ensure proper handling and safety precautions.