notebook
A computer can not turn off by itself. The monitor just turns blank it you leave it. To turn off the computer you have to prees the on button on your computer. If you press the botton on the monitor it is not turning the computer off... just the screen.
You can turn on your monitor's speakers by inserting the audio jack into its audio-in port. If no audio is heard, ensure your computer's system volume is turned up.
The first thing I would try is to hold down the menu button for 15 seconds. This should work but if it doesn't then try this: * Turn the computer and monitor off * Disconnect all monitor cabling from the monitor (power, USB, VGA, DVI, etc.) * Press and hold in the monitor power button in for 5 seconds * Reconnect the monitor to the computer * Reconnect the monitor power cord to the monitor * Turn on the monitor, then the computer * Press the Menu button for 15 seconds to unlock the padlock feature
You can turn on your monitor's speakers by inserting the audio jack into its audio-in port. If no audio is heard, ensure your computer's system volume is turned up.
the monitor will have a power button on it. Depending on the type, it may be in different locations, but it shouldn't be hard to find. Turn that on.
maybe it's broken.push the power button?U may need a new monitor
The power button.
To turn on the webcam on an Asus VK228 series monitor, you typically need to ensure it's connected to a computer and that the appropriate drivers are installed. For the speakers, check the audio output settings on your computer to make sure the monitor is selected as the output device. Also, adjust the volume settings on both the monitor and your computer to ensure sound is enabled. If issues persist, consider checking the monitor's settings menu for audio options.
computer
Computer monitors have higher resolution (more lines or pixels) than television monitors (screens or tubes). Computer monitors also have the ability to "address" (pinpoint and turn on/off or color) every pixel (single dot of color on the screen). Television monitors do not have that precision.
OSD Lock Function: To lock the OSD, press and hold the MENU button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU button while the monitor is off and then press power button to turn the monitor on.
To un-lock the OSD - press and hold the Left button while the monitor is off and then press power button to turn the monitor on.