The device is not recognized.
Because of your internet connection
It depends if you have a good connection it will connect but if its under50% or what ever the limit is it wont
modular router
You can tell if you are working offline by checking your device's network connection icon, which typically shows no signal or a disconnected status. Additionally, applications that require internet access may display error messages or fail to sync data. If you’re using a web browser, pages may not load or display a "no internet connection" message. Lastly, you can try accessing websites or online services; if they don’t load, you are likely offline.
What are some possible consequences if you fail to deliver message when recieve
Bus runs in a straight line from one network device to another. So if one gets disconnect then the all the devices connected down the line get disconnect. Star runs to a central device like a switch, so if the switch itself fails then the whole network will be disconnected. Ring is like a bus except it connects back onto itself. So if one device fails they all fail. The exception is if there is a redundant inside ring like that used in FDDI (fiber ring) then if both get disconnect from one device then they all do. Mesh is high redundancy. Only one device would be disconnected if all the connections were to fail for that device. You can have many connections to other devices thats why its less likely to fail. The only cause for failure at this point is really the power and if you just don't have any. Even if one of the connections between two devices fail there is no effect on network and they can still communicate through other channels
because of sex
Either they do not trust your message or they do not trust Jesus'.
if any item fails, they will all fail ...{not work}
Fail-over is a term used with fault tolerance. It refers to the ability of a device or system to continue to work after a problem has been detected by using a backup or redundant device. The term refers to detecting a failing component and having the other component to the work (failing over to a good device).
The audience may not trust the speaker.
The thermocouple may continue to fail to stay lit due to a faulty connection, a buildup of dirt or debris, or a worn-out component.