0
It will act like a buffer but not the exact buffer. Since nmos conduct logic 1 weakly and pmos conduct logic 0 weakly, the output ranges from vdd-vtn to vtp. For eg. If you apply 5v then the op will be 4.3 not the complete 5v. If you apply 0v then output will be 0.7v not 0 v.
Hope this works
What else can I help you with?
What happens if you interchange pmos and nmos in a cmos inverter?
it becomes a buffer
Is cmos a combination of both nmos and pmos?
yes
Why are pmos larger than nmos in cmos design?
PMOS transistors are typically larger than NMOS transistors in CMOS design because the mobility of holes (the charge carriers in PMOS) is lower than that of electrons (the charge carriers in NMOS). This means that a larger current-carrying area is needed in the PMOS to achieve the same performance as the NMOS transistor. By making the PMOS larger, designers can balance the drive strengths of the two types of transistors in a CMOS circuit.
What are the Disadvantages of cmos over pmos and nmos?
CMOS and NMOS are two logic families. As the name itself indicates, CMOS is complementary Metal Oxide Semiconductor technology. It uses both PMOS and NMOS transistors for design. Whereas, NMOS logic family uses only NMOS FETs for design.
What are advantages of transmission gate logic over Cmos logic?
cmos logic circuit uses particularly pmos or nmos viz. passes strong 1 and strong zero respectively and also degraded zero's and one's in their respective cases of p and nmos so to remove deggraded output the nmos and pmos are combined together for strong output level
What are the differences between nmos and pmos transistors?
NMOS is built with n-type source and drain and a p-type substrate, while PMOS is built with p-type source and drain and a n-type substrate. In a NMOS, carriers are electrons, while in a PMOS, carriers are holes. When a high voltage is applied to the gate, NMOS will conduct, while PMOS will not. Furthermore, when a low voltage is applied in the gate, NMOS will not conduct and PMOS will conduct. NMOS are considered to be faster than PMOS, since the carriers in NMOS, which are electrons, travel twice as fast as holes, which are the carriers in PMOS. But PMOS devices are more immune to noise than NMOS devices. Furthermore, NMOS ICs would be smaller than PMOS ICs (that give the same functionality), since the NMOS can provide one-half of the impedance provided by a PMOS (which has the same geometry and operating conditions).
Why substrate in nmos connected to ground and pmos connected to vdd?
In CMOS technology, the NMOS transistor's substrate is connected to ground to prevent parasitic effects and ensure proper operation, as it helps maintain a lower threshold voltage for the NMOS. Conversely, the PMOS substrate is connected to VDD to keep its threshold voltage stable and ensure that the PMOS operates correctly in the enhancement mode. This arrangement minimizes unwanted channel formation and enhances performance by reducing leakage currents in both types of transistors.
What is the use of pseudo nMOS gates in digital design?
These circuits use nMOS for implementation of a whole gate + one pMOS which is connected between positive supply and nMOS.
What type of doping have the drain and the source of a PMOS transistor?
PMOS - (drain + source) = p-type doping NMOS - (drain + source) = n-type doping :)
What are the advantages of PMOS and NMOS?
* reduce the complexity of the circuit* low static power consumption* high noise immunity* high density of logic function on a chipThe most important advantage of CMOS is the very low static power consumption in compare with NMOS technology. On the other hand, CMOS technology is more complex to fabricate then NMOS technology, so it is more expensive. However, almost every todays digital circuits are CMOS. You want to use NMOS only when you want to fabricate fast and low-cost a simple circuit. The most important advantage of CMOS is the very low static power consumption in compare with NMOS technology. On the other hand, CMOS technology is more complex to fabricate then NMOS technology, so it is more expensive. However, almost every todays digital circuits are CMOS. You want to use NMOS only when you want to fabricate fast and low-cost a simple circuit.
Which mos needs logic '1' on its gate terminal to get ON?
It is NMOS FET. PMOS works in a reverse way.
What is difference between inverter and buffer?
if you connect Nmos and Pmos other way around then it act as buffer
