0
What else can I help you with?
What hardware device links multiple cable segments and regenerates that signal out all connected ports without examining a data packet contents?
switch
What network device receives a signal and then transports a signal to all other nodes connected to it?
Traditionally a hub or repeater would put signals on all other nodes connected to it. If this is a broadcast signal, then any device (with the exception of a router) would present signals to all other devices connected to it.
What network hardware device regenerates a signal and broadcasts it to every computer on the network?
hub
A line of a motherboard bus that a hardware device or expansion slot can use to signal a CPU that the device needs attention is called?
IRQ
No input signal?
"No input signal" typically refers to a state where a device, such as a monitor or television, is unable to receive or detect a video signal from a connected source. This could be due to various reasons, including loose or damaged cables, incorrect input settings, or issues with the source device itself. To troubleshoot, check the connections, ensure the correct input source is selected, and verify that the source device is functioning properly. If the problem persists, it may indicate a hardware issue that requires further investigation.
It is a device that gathers the signals from that are connected to it and then regenerates a new copy of each signal?
The device you are describing is likely a signal repeater or signal booster. It receives incoming signals, amplifies them, and then retransmits a stronger copy of each signal to extend coverage or improve quality. This is commonly used in telecommunications to enhance signal strength in areas with weak reception.
How can I stay connected to the internet on-the-go with a WiFi anywhere device?
To stay connected to the internet on-the-go, you can use a portable WiFi hotspot device. These devices use cellular networks to provide internet access wherever you have a signal. Simply turn on the device, connect your devices to its WiFi network, and you can browse the internet from anywhere.
How convert coaxial cable signal to ethernet signal?
To convert a coaxial cable signal to an Ethernet signal, you can use a device called a coax-to-Ethernet adapter or a MoCA (Multimedia over Coax Alliance) adapter. This device connects to the coaxial cable and translates the RF signal into Ethernet data, allowing you to connect it to your router or network device via an Ethernet cable. Simply connect the coaxial cable to the adapter, then use an Ethernet cable to link the adapter to your network hardware. Ensure that the adapter is compatible with your internet service provider's coax signal.
What is a 6mm signal pistole?
A signal/flare device.
Is a cam an input device?
Yes. It converts what are you recording in to electric signal and this signal put INTO a computer.
Which LAN hardware component is used to amplify the signal travelling on the cable?
Any active network device will do that. If this is a test question, answer "A repeater", as that is the only function of such device. In truth, any device that takes a signal from one end and transmits it through another end will "boost" (amplify) the signal - or, rather, it will send out a "new" signal carrying the same information. Such devices include all types of hubs, switches and routers. Also, as mentioned above, repeaters. If you meant "cable" as in "cable tv" - then it's the modem/router, usually the first device hooked up into the cable. As I've mentioned above, however, these devices take the signal in and put out a new signal on the other end, so they don't really "amplify it" as such (usually processing of the signal is involved).
What do you mean by input and output devices?
An input device is a piece of hardware that you put data into the computer, such as a mouse or keyboard. An output device is something that the computer controls to output data, such as the screen or speakers.
