answersLogoWhite

0

It tells the motherboard that the "Power is Good".

PG stands for Power Good.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

What colour is the ground wire for a computer power supply?

green


What type of wire should I use for my RV that requires a 50 amp power supply?

For an RV that requires a 50 amp power supply, you should use a 6-gauge wire.


How do you properly wire fluorescent lights to ensure they function correctly and safely?

To properly wire fluorescent lights for correct and safe operation, follow these steps: Turn off the power supply to the circuit where the lights will be installed. Connect the black wire from the light fixture to the black wire from the power supply. Connect the white wire from the light fixture to the white wire from the power supply. Connect the green or bare copper wire from the light fixture to the ground wire from the power supply. Secure all connections with wire nuts and electrical tape. Turn on the power supply and test the lights to ensure they are functioning correctly. It is important to follow all safety guidelines and local electrical codes when wiring fluorescent lights. If you are unsure or uncomfortable with electrical work, it is recommended to hire a licensed electrician.


How do you get an ATX power supply to turn on?

ATX power supplies do not have dedicated switches. They are signaled to turn on by a small button plugged into the motherboard and placed on the front of the computer case. It is possible to force an ATX power supply to turn on by running a wire between the PS_ON wire (the green wire) to a ground wire (a black one).


What is bus wire?

In the construction trade, bus wire is used for the feeders that connect the two wires on a blasting cap to the power supply. The other end of the bus wire is connected to the hand generator that is used for a power supply to energize the blasting cap.


Do USB connectors have their own power supply?

A USB wire will always have a way to transport power. This wire in the USB wire will not necessarily be used all the time but it will always be there


How do you wire a deflecto tf4 fan booster?

To wire a Deflecto TF4 fan booster, first turn off the power supply. Then, connect the black wire of the booster to the hot wire in the junction box, the white wire to the neutral wire, and the green wire to the ground wire. Once the connections are secure, turn the power supply back on and test the fan to ensure it is working properly.


What voltage would you expect to measure on a red wire from a power supply?

The voltage on a red wire from a power supply typically depends on the specific power supply being used. Common voltages for red wires in power supplies include +5V, +12V, and +24V, among others. It is important to check the specifications of the power supply to determine the exact voltage.


Can CAT5 wire be used to supply power?

Yes. A Cat-5 line can be used to supply power to certain Ethernet Switches that support POE, or Power Over Ethernet.


What type of wire should be used for an RV that requires a 30 amp power supply?

For an RV that requires a 30 amp power supply, a 10-gauge wire should be used to safely handle the electrical load.


What is a good wire gauge for a car radio?

A good wire gauge for car radios is 18 gauge. This wire runs between the radio and its power supply from the vehicle.


Why do you balance 3 phase supplies?

A three phase 4-wire supply that is correctly balanced has zero current in the neutral wire, which means that no power is lost in it. A three-phase 3-wire supply that is unbalanced has unnecessarily high currents in one or more wires, so again power is lost.