They have three vertical blades with one of them above and between the other two
db is one of the computer connector that transfer information to other devices
A technician is installing a new power supply in a computer Which type of power connector should be used to connect to a PATA hard drive?berg mini-molexmolex.20-pin ATX connector
hard drive.
systems that have the standard ATX motherboards.
A Molex power connector is a 4-pin power connector found in most computer power supplies. It is used to provide power to large internal drives like hard drives and CD/DVD drives. They are slowly being replaced by SATA power connectors, which are easier to install can cannot be inserted incorrectly. They should not be confused with a Berg connector which is much smaller and is used to power floppy drives. The molex connector is used for IDE drives
A graphics card often requires extra power and connects via a 12V 6-pin power connector to support its higher power demands. You can typically find this connector on the graphics card itself and on the power supply unit (PSU) of the computer, where it provides additional power necessary for optimal performance.
No FireWire does not need a separate power supply to operate. FireWire is used to connect peripheral devices to a computer.
Yes, it can be normal for a computer to only power on when the 20+4 pin connector is plugged in without the additional 4-pin connector, but this usually indicates a problem. The 4-pin connector provides extra power to the CPU, and without it, the system may not function properly or could be unstable. If your computer operates only with the 20+4 pin connected, it's advisable to check the 4-pin connector, the motherboard, or the power supply for any issues.
Certain cards can add in either more power or more outputs/inputs to a computer. For example, a graphics card adds more power to process graphics (used in gaming or engineering), or a sound card might add an SP/DIF connector or a subwoofer connector that the computer wouldn't have otherwise.
Connect the front panel molex's to every available connector (3-pin molex connector) Or get a new one. I am experiencing the same now.
Your power supply unit, PSU. Takes AC power and distributes so much power to each connector. Each PSU, depending on the wattage of the unit gives each connector so much voltage. Each connector is designed for a certain piece of hardware that requires different voltage.
your power supply has a small plug attach to it with several larger ones that go to your cdrom and hard drive it will fit in to the back of your floppy