0
What else can I help you with?
How can you convert VGA signals to SVGA signals?
yes its very simple to convert VGA signal into SVGA signal.
What is difference between vga and lcd display?
The main difference between the tow is the signal. VGA uses an analog signal and DVI is a digital signal.
Sorry no, You would have to convert the VGA signal on the computer to one of the input types your TV has built in.?
Sorry no, You would have to convert the VGA signal on the computer to one of the input types your TV has built in.
What purpose does a vga to HDMI serve?
VGA to HDMI cable convert an analogue signal to a digital signal. It does this by connecting an audio cable to the adapter, where the video signal is fused with the audio also, so there is only one cable connecting to your HDTV.
A VGA-HDMI cord can plug into my monitor via the VGA side and the HDMI into the output device. Is the LCD monitor output still going to be analog which would make that cord useless?
When you use a VGA cable coming out of the monitor, the monitor is giving out an analog signal through the VGA connection. For the monitor to give out a digital signal, you need a DVI or HDMI cable. The VGA to HDMI cord just converts the analog signal into a digital signal so it's not completely useless, however the quality will not be as good as an HDMI to HDMI or DVI to DVI or HDMI to DVI
What does vga no signal mean on your computer screen?
No VGA signal means that the VGA wire is not getting any video output from the CPU.To Rectify:Check that the VGA cable is tight enough on both the ends.Check if the Pins of cable are broken or not.Your video card might be faulty.Try a different Monitor.If the other monitor works then the problem lies with the computer (motherboard video output)
Do HDMI to vga converters work?
Yes they work well. There are many types but all have the same basic operation of converting the analog video stream of VGA into a digital equivalent. There is a myth that HDMI is better than other signal formats. Be assured that this is absolutely not true. An HDMI signal generated from a VGA signal will not be any better than the original VGA signal. HDMI is simply a digital signal format and carries a signal in the same way that VGA or any other interface carries a signal. So, use a VGA to HDMI converter if you need to connect it to a display that only has and HDMI input. Don't use one if there is an existing VGA input available as it won't make the picture any better.
Your VGA to RCA cord will not work?
This is one of the most common problems in terms of PC to TV hook-up. People will buy this VGA to RCA cable to connect their computer to their TV but the VGA signal is foreign and not compatible with the TV's RCA input, which is usually either called composite or component video (both are not the same signal as VGA). Since the signal is so different, you need an actual VGA to RCA signal conversion box. These will cost around $30 to $200 depending on whether you are wanting to do composite or component video. Composite is the standard definition (fuzzy and not that great) and component is much more clear and can support high definition.
How do you connect an RCA output signal to the input on a VGA monitor?
via something like this: Composite and Y/C (S-Video) to VGA Monitor Converterhttp://www.allthings.com.au/Catalogue/Monitors/vid%20to%20vga%20plus.htm
What is a VGA input?
VGA is the standard analog interface for computer displays. A television monitor that has a VGA input will be able to display a computer image just like a PC screen. VGA can also be used by video equipment so it can be used as a video signal interface for those items of equipment.
Is VGA port a serial port?
No. VGA port is not either serial or parallel port. It is a different interface. If you need a serial output, you need a VGA to serial converter.
What kind of cable is needed to connect VGA to RCA?
VGA, a computer video output, cannot be converted to a composite (1 video wire) or component video (3 video wires) signal with just a cable. VGA can be much higher resolution than composite video. You will need a scan converter box to create the NTSC video signal.
