0
What else can I help you with?
What is Primary IDE Channel?
The Primary IDE Channel component provides the IDEport driver in the atapi.sys file.The IDE port driver is part of the IDE driver model in Windows 2000
How many IDE port on the mother board?
Traditionally motherboards were built with 2 on board IDE ports. However more and more mother board's are coming with 1 due to the use of SATA ports. The one IDE port i usually used for the CD-ROM.
Use of port 9000?
Port 9000 is not pre-assigned to any function. It is the default port for the XDebug component used in many web development IDE's. www.xdebug.org
Does an hp pavilion xt926 have an SATA port?
No, it does not. It only has 2 IDE Ports. But you could buy a PCI Card with SATA ports.
Does the motherboard determine what hard drive to install?
To some extent yes, the motherboard does indeed determine what kind of hard drive to install. Most modern motherboards will have SATA ports for the hard drives. The SATA ports are small in size and are usually labeled as SATA1-SATA4 or however many the motherboard has. You can read it right on the board. Older motherboards, however, used to use PATA or IDE hard drives (PATA & IDE are the same thing but with two different names). An IDE port on a motherboard is about 3-4 times the size of a SATA port. The really old boards may not have the IDE port labeled, but most other motherboards will have the letters IDE (or PATA) written next to the IDE port. If you're referring to a motherboard from the last 5-7 years, the chances are that it has SATA ports. The best thing to do is to look at the motherboard.
Two western digital hard drives one IDE and other is on Sata cable The Sate is Master but can not get the IDE WD to work or reconize?
Western digital needs to have no jumper to be by itself on a cable, or bios sometimes shares the sata as ide0 and so change your sata port and enable one as ide and the other channel as sata.
Where is the location of a bIOs on a computer?
BIOS is located near the IDE port which is used to connect power cable to monitor , there are two jumpers settings near this port which are called BIOS and this are used for the setting for the motherboard. These are black in color.
Can you Transfer files from a sata drive to ide drive?
Yes you can transfer files if your motherboard support both types of drives, if it has the connectors both for sata and pata (ide). If it supports only sata than you can do so by connecting your ide via usb port with a commercially available usb card and cable with its own power supply. Regards Rizwan Ghafoor
Can a Scsi port use Ide Hardrives?
No, SCSI (Small Computer System Interface) ports cannot directly use IDE (Integrated Drive Electronics) hard drives, as they operate on different protocols and interfaces. SCSI uses a parallel interface and has its own command set, while IDE uses a different protocol designed for simpler connections. However, there are adapters available that can convert IDE drives to SCSI, but these are not common and may introduce compatibility issues.
Can I connect 2 SATA hard drives to 2 SATA connectors and DVD burnner to IDE connector on the same mother board?
Yes. Assuming that your mobo has at least 2 SATA ports, 1 IDE port, and appropriate power cables are available from the power supply.
Full name of ide?
ide
What the meaning of IDE?
what is the meaning of IDE
