ide / (p)ata 133 is the speed of a Ide / (p)ata Harddrive more info @ http://en.wikipedia.org/wiki/AT_Attachment
It is more common for the reverse to be true. Manufacturers will design their drives to use SATA and then modify the design to accommodate IDE. The result is a fast drive on a slow interface for people who do not have SATA ports on their computer. When SATA was first introduced, older drive designs were converted to use SATA, but IDE was completely removed. Most 7200 RPM hard drives are just now starting to reach the limits of ATA-133 (133 MB/s). Most drives still do not take a big performance hit if used on IDE.
You must research your lecture notes. Specifically, the section on ATA cable specifications. Regards, Your Instructor
IDE drives commonly use the ATA standard. ATA usually runs at ATA-33, ATA-66, ATA-100, and ATA-133. These run at 33 MB/s, 66 MB/s, 100 MB/s, and 133 MB/s respectively. Most modern IDE hard drives run at ATA-100 or ATA-133 while older If you have your hard drive on a 40-wire PATA cable and/or the PATA cable attached to your hard drive is also attached to your CD-ROM drive, your hard drive might be forced to run at ATA-33. For best performance, only use an 80-wire PATA cable and do not connect your optical drive with it.
ide
what is the meaning of IDE
Rakkyo Ide's birth name is Hiroshi Ide.
Christopher Ide's birth name is Christopher Maki Ide.
notebook IDE connector= 44-pins Desktop IDE connector= 40-pins
Fabio Ide is 6'.
Colour doesnt matter for the IDE. It is the number of pins that are available in the IDE slot If it is a 40pin IDE, it will support HDD and CD/ DVD RAM drives. If it is a 34 pin IDE, it supports the FDD
The best IDE channel to connect on a hard drive is the Primary IDE channel, Also known as IDE 1 in dell computers
PCI IDE card allows connecting IDE hard drives and CD/DVD drives if a motherboard is missing or has not enough IDE ports.