if it says power button locked hold "<" button and power button till the message goes.(at least a min)
The switch for the computer is separate to the monitor switch. To switch on the monitor, just press the button on the bottom right of your monitor (The thing you are looking into to see this answer).
Normally there will be a button on the monitor. Switch it off and switch it on again - that should fix it.
To resolve the issue you can hold the power button of the monitor until you get another message something similar to "OSD unlocked"....if the problem continues. Switch of the monitor and remove the power cable and connect it again.
A switch is used to make an operation go 'on' or 'off' , it does not monitor anything.
OSD (On Screen Display) lockout. To resolve the issue you can hold the power button of the monitor until you get another message something similar to "OSD unlocked"....if the problem continues. Switch of the monitor and remove the power cable and connect it again.
To safely and effectively use a generator manual transfer switch, follow these steps: 1. Turn off the main power supply before connecting the generator. 2. Connect the generator to the transfer switch using the designated cables. 3. Start the generator and switch the transfer switch to the generator position. 4. Monitor the power usage to avoid overloading the generator. 5. When the main power is restored, switch the transfer switch back to the main power position and turn off the generator.
The monitor is not powered by the computer. If there is not Signal to the monitor from the computer there will be no display, however the power to a monitor is supplied by a separate cord from the outlet to the monitor.
The steps to switch on a computer begin with making sure that the computer and its peripherals are plugged into an electrical outlet. Turn the power switch on the electrical outlet and press the power button on the computer tower. Turn on the computer monitor and wait for the computer system to start up.
If all you want is to play your Nintendo Switch games on your computer’s monitor, you don’t need to connect it to your PC. Most modern monitors have HDMI connectors and are likely to have more than one. So all you need to do is plug your Switch dock into your monitor using an HDMI cable.
A data transfer switch can change power sources during a power outage and avoid a shutdown to a critical data center. Data transfer switches can monitor voltage capacity and direct it to circuits that need it for cooling or heating purposes.
Try a monitor reset. Unplug the monitor and hold down the monitor's power button for 30-30 seconds. Plug the monitor back in and power it up. If that doesn't work then go into the monitor's menu and do a factory reset.