Single sided DIMM is an oxymoron like calling a bald person curly. DIMM stands for dual inline memory module. A single inline memory module is obviously a SIMM, but since the acronym was never used back then, there was no demand to ask for them when DIMMs were invented.
Yes. The Intel CC820 motherboard has two DIMM slots that can use two single-sided DIMMs , two double-sided DIMMs or one single-sided DIMM and one double sided DIMM. In that case, the single-sided DIMM must be in the first slot.
SIMMs and DIMM are both type of main memory modules. One in single-sided (SIMM) and one is double-sided (DIMM).
single-ranked
dual ranked dimm. This is incorrect! Single-ranked DIMMs cost more but perform better because the controller accesses all chips at the same time. Dual and quad ranks are a method of reducing the overall price of memory in a system, but at the expense of performance.
Single-ranked DIMMs cost more but perform better b/c the controller accesses all chips at the same time.
240-pin DDR3 dimm is currently the fastest memory. it can support quad, triple, or dual channels or be installed as a single dimm. it has an offset notch father from the center than a ddr2 dimm
Single in-line memory module and dual in-line memory module.
Single sided single layer DVD 4.7 GB Single sided dual layer DVD 8.0 GB Double sided single layer 9.4 GB Double sided dual layer 17 GB
DDR 3 240 pin DDR3 DIMMs · Are currently the fastest memory commercially available and can support triple channeling, dual channeling and can be installed as a single DIMM.
Are you referring to a copy machine. Duplex copies are printed on both sides of the paper. If copying from originals, normally the following options are available. 1 -> 1, single sided copies from single sided originals. 1 -> 2, double sided copies from single sided originals. so 4 sheets -> 2 double sided sheets. 2 -> 2, double sided originals make double sided copies. 2 -> 1, double sided originals make single sided copies. So 2 double sided originals make 4 sheets single sided copies.
dimm
Single-sided memory has memory chips on only one side of the module, while double-sided memory has memory chips on both sides. Double-sided memory typically has a higher memory capacity than single-sided memory due to more chips being present.