The clock is the amount of GHZ the processor can handle.
For example, the clock of a Core2Duo is of 2.4GHZ.
Overclocking means increasing the GHZ's the processor can handle but you will need a lot of cooling since the fan is not designed to handle such high GHZ's the people want.
How do you interface a clock and microprocessor?
The clock signal in a microprocessor allows synchronization of several components of the microprocessor. The correctness of the computation of the microprocessor depends upon efficient and balanced distribution of the clock signal. The clock generator generates the clock signal.
Microprocessor processes something on each clock pulse
In the 8085 microprocessor, the clock out pin (often labeled as CLK OUT) provides a clock signal that can be used to synchronize external devices or circuits. This output clock signal is derived from the internal clock of the microprocessor and operates at a frequency determined by the oscillator connected to the clock input pin. It allows other components in a system to operate in sync with the microprocessor's timing, ensuring proper data transfer and communication.
It is the ratio of the on and off time or the clock signal, which is generated by the clock generator...
The 8086 Microprocessor operate to require frequency that is provided by clock generator to 8086 Microprocessor and also Synchronization various component of 8086.
that depends on the microcontroller. check the datasheet.
one is for the vcc and another for the clock pulse
A T state is one cycle of the system clock.
[url=http://www.dvdsuperdeal.com]A microprocessor[/url] is a multipurpose, programmable, clock driven, register based device that takes input and provides output.
vcm sdram
it has high stability large q factor and the frequency that doesn't drift with aging. It is used as a clock source most of the times.