This varies from 233mhz to 450mhz
As a whole, the Pentium 4 has a higher maximum performance than a Pentium III. The Pentium III performs the same as or better than Pentium 4 at the same clock speed, but the Pentium 4 has a higher max clock speed (which the Pentium 4 was designed for).
No Intel Pentium 4 processor was ever manufactured running at a clock speed of 500MHz. However, the previous product line, the Pentium III, had several variants running at that clock speed.
Yes, the Pentium III processor at 600MHz is faster than the Pentium II processor at the same clock speed due to architectural improvements that enhance performance. The Pentium III has additional features like SSE instructions and larger cache sizes, which contribute to its faster performance compared to the Pentium II.
The Intel Pentium II was released in a Slot 1 package, while the Pentium Pro used socket 8. Adapters were available to use Pentium Pros in Slot 1 motherboards, and a version of the Pentium II was released for Socket 8.The Intel Pentium II includes MMX instructions, while the Pentium Pro does not.The Intel Pentium II has improved performance in 16-bit applications. 32-bit applications were not affected quite as much.
The fastest "classic" Pentium is clocked at 200 Mhz. The fastest Pentium with MMX extension is clocked at 300 Mhz. The fastest Pentium II is clocked at 400 Mhz. The fastest Pentium III is clocked at 1.4 Ghz. The fastest Pentium 4 is clocked at 3.8 Ghz. The fastest Pentium D is clocked at 3.7 Ghz. The fastest Pentium M is clocked at 2.26 Ghz. The fastest Pentium Dual-Core is clocked at 2.5 Ghz.
A clock cycle is the low-hi-low transition of the clock. On each transition, the processor executes an instruction. It determines the speed if execution. So the faster the clock runs, the faster the chip works. This is why a Pentium 1 GHz chip is a LOT faster than a Pentium 100 MHz chip. Its unit is in Hz (or s-1) because it is a factor of frequency...
Pentium II was created in 1997.
The optimal fan speed depends on the size of the heatsink and the clock rate of your processor. As such, there is no single answer.
This is dependent on the type of code being run, as well as the clock speed of the processors. 16-bit code, for instance, was much slower on the Pentium Pro than the Pentium, while 32-bit operations were generally slightly faster.
No. The Pentium II was only available in a Slot 1 cartridge, with the exception of the Pentium II Overdrive, which was made as an upgrade to Socket 8 motherboards. Pentium II-based Celerons, however, were the first processors available for Socket 370, which was later used for Pentium IIIs.
Possibly. "Celeron" doesn't refer to any particular processor. They are cost-reduced versions of the Intel Pentium II, Pentium III, Pentium 4, Pentium M, and Core 2 Duo. Assuming that your Celeron is based on a processor that is faster than the Pentium III, you shouldn't have any problems. If yours is based on the Pentium III, check the clock speed. A 1.2 GHz Celeron, for instance, is probably fast enough for a game that requires a 1 GHz Pentium III.Other factors, such as the graphics card of your system, may also be important.
With this being a Pentium II, or Pentium III, you would be looking at a speed of either PC100, or PC133. Hope this helps be safe Cadishead Computers