Port Triggering opens a port when a PC on the network initiates communication through another port.
Ethernet port
If a network address is thought of as a physical address for a building then a port would be a room within the building. THe function of a port is to allow software to listen for or send out communication that is specifically related to it's function. For example, most internet (http) traffic is on port 80, FTP (File Transfer Protocol) sends and listens on Port 21, other services use other ports. This allows a single computer with a single IP address to be both a web server and a file server.
Lan Card provides a port for a network cable to connect the pc to a network.. LAN : Local area network or Ethernet Card and Network Card
In a daisy-chain configuration, hubs are typically connected using a specific type of port called a "stacking port" or "cascading port." These ports allow for the direct interconnection of multiple hubs, enabling them to function as a single network segment. This setup helps expand the network while maintaining a streamlined connection between devices.
That would be a network printer.
It's an Ethernet port used for network connections.
The function of southhampton is a port!
A cloning port is a specialized endpoint on a switch that allows network administrators to replicate or copy network traffic from one port to another. This is often used for troubleshooting, network monitoring, or security analysis purposes. By using a cloning port, administrators can monitor and analyze data without disrupting the flow of traffic on the network.
LAN Port, Network Port or Ethernet Port
Port 80
consider a two port network. if u take the ratio of output of one port either current or voltage/ input of other port either voltage or current, if it is same parameter ie. V2/V1 then we call it as transfer function or gain also. V1 is the input port voltage and V2 is the output port voltage. In s domain also we can call it as transfer function, and also not necessary restricted to s-domain only. Suppose if is of different parameter ie. I1/V2 we can call it as reverse transfer admittance function but thing is to note the presence of 'transfer' term. At the same time the ratio of parameter current or voltage of the same port we call it as driving point function. It can be Admittance function ie. I1/V1 or Impedance function ie. V1/I1