0
The question is unclear; if you are using 10baseT and you have 10 clients then that is your capacity.
Wiki User
∙ 14y ago
Wiki User
∙ 12y ago10Mbps
Add your answer:
Earn +20 pts
What is 10BaseT Ethernet NIC?
It is a Network Interface Card that connects 10BaseT Networks together A 10BaseT Cable is an Ethernet Cable consisting of 4 pairs of wires 2 for transmitting and 2 for receiving
4.5 sec on fast Ethernet means how long on 10BaseT?
Fast Ethernet is 10 times faster than 10BaseT, so 45 seconds.
Which Ethernet standards supports csma CD?
10BaseT
What is 10base2?
10BaseT is an Ethernet cabling standard. 10BaseT devices can transfer data at a rate of up to 10 Mbps, and use twisted pairs of wires in their Ethernet cabling, as opposed to a coaxial cable. If you see wiring with an RJ-45 plug on the end, you probably have a 10BaseT or backwards-compatible product (such as 100BaseT or 1000BaseT).
Types of Ethernet?
10baseT - 10Mbps 100BaseT - 100Mbps GigE - 1000Mbps or 1Gbps 10GigE - 10000Mbps or 10Gbps
What thin ethernet cable is used for 10-base-2 Ethernet 802.3 Ethernet thinnet?
10 Base 2 uses RG58. Since this is in the Catagory for Xbox. you can not connect this directly to your Xbox, you must use 10BaseT or a converter to get from 10Base2 to ethernet with an RJ45 Connector.
Which thin Ethernet cable is used for 10-base-2 ethernet 802.3 ethernet thinnet?
10 Base 2 uses RG58. Since this is in the Catagory for Xbox. you can not connect this directly to your Xbox, you must use 10BaseT or a converter to get from 10Base2 to ethernet with an RJ45 Connector.
What is the difference between 10BaseT Ethernet and 802.11b WLAN regarding theoretical and realistic transmission rates?
10BaseT has transmission rate about 10 Mbps and 802.11b is about 11 Mbps. Usually wire connections are closer to their theoretical limits than their wireless counterparts.
How does the speed of 802.11n compare to gigabit Ethernet?
802.11n is rated for a maximum bandwidth of 135Mbps and Gigabit Ethernet (as the name implies) is rated for 1Gbps (or 1000Mbps).
What is the difference between FE and GE Port?
FE means Fast Ethernet having bandwidth 100 Mbps ,SFP 850 nm or 1310 nm GE means gigabit Ethernet hving bandwidth 1000Mbps ,SFP 1550 nm
In theory if a file x is transferred in 4.5 seconds on a fast ethernet lan how long would the same file transfer take n a 10baset lan?
45 Seconds.
1 Name three types of Ethernet What transmission speed does each support?
(From: Jean Andrews CompTIA A+ 6th Edition pg. 846) The three variations of Ethernet are primarily distinguished from one another by speed: (1) 10-Mbps Ethernet, (2) 100-Mbps or Fast Ethernet, and (3) 1000-Mbps or Gigabit Ethernet.
