You have to give the printer the same SSID and password of the network your using.
If you have a user password for the printer for multiple users then you would have to ask the administrator or whoever set the printer up for the password.
Network printer which has password . which you cannot make any changes
its a wifi or network password
9225505277
2545484723333335
easter17
Yes, that's a good approach if the printer is connected to your home Wi-Fi network. Install the printer on one computer first, ensure it prints correctly, and then enable Printer Sharing in that computer's settings. After sharing is enabled, the other computers on the same network should be able to discover and connect to the shared printer. Keep in mind that the host computer must remain powered on and connected to the network for the shared printer to be available. If the printer supports network printing or AirPrint, it's usually even better to add it directly to each computer instead of relying on printer sharing.
Wifi printer installation varies from printer to printer. There are printers on the market today that are WIFI ready and all you have to do is link it to your wireless network. Other printers can be more complicated.
If you have a strong password set for your WiFi network and have never shared it with anyone, chances are your neighbors are not connected to your WiFi network. If you have a router installed you can usually log in and see the table of systems connected to the router. You can always change the password for your network and this will disconnect everyone who doesn't have the right password. If you don't need to enter a password to log on to your network, your network is not protected and a password should be set, to do so, find out the manufacturer of the router and model and then search for instructions on how to protect your WiFi connection for your particular router.
Any standard 802.11b/g/n network, that is just about any wireless network sold in the past five years, will work with a wifi printer. The wireless transceiver is built into the printer.
Click your wifi, then choose your network, then type in password.
No, it has a wired network interface
if you want to go on the app store on the ipod you have to get wifi then go into settings then to wifi the connect to a network by tapping an available network then put in the password that it is set to